Checking The Delivery - Siemens SIMOTICS FD 1LM1 Operating Instructions Manual

Preparations for use
4.17 Transport
Danger if the machine falls
The attachment points on the machine are designed for the weight of the machine only. If a
machine set is lifted and transported at a single machine, this can fracture the attachment point.
The machine or machine set may fall. This can result in death, serious injury or material
damage.
● Do not lift machine sets by attaching lifting tackle to the individual machines.
● Use only the equipment provided, e.g. the openings or lugs on the base plates, for
Danger when attachment points fracture
At low temperatures, the material of the attachment points can become brittle. When lifting and
transporting, the attachment points can shear off and the motor can fall.
This can result in death, serious injury, or material damage.
● Only lift the machine using the attachment points at temperatures that are not below -20 °C.
● Heat up the attachment points properly beforehand.
4.17.2

Checking the delivery

The components are assembled on an individual basis. When you take receipt of the delivery,
please check immediately whether the scope of the delivery matches up with the
accompanying documents. No claims relating to defects/items missing from the delivery will be
accepted if they are submitted at a later date.
● Report any apparent transport damage to the delivery agent immediately.
● Immediately report any apparent defects/missing components to your contact partner.
These Operating Instructions are part of the scope of delivery; keep them in a location where
they can be easily accessed.
36
transporting machine sets. Note the maximum capacity of the lifting lug.
SIMOTICS FD 1LM1
Operating Instructions 01/2019