Table of Contents
Advertisement
Plumbing
Water connection
This machine must be connected to
the water supply in accordance with
all national and local plumbing
codes.
,
Water in the machine is not
suitable for drinking.
– The machine must be connected to
the water supply in accordance with
local and national regulations.
– The water being used should have
drinking water quality.
A high iron content can lead to rust
at the items to be cleaned and at the
machine.
At a chloride content of more than
100mg/l there is a higher risk of
corrosion for the items to be cleaned.
Water supply pressure
Hot + Cold water connection =
min. 22 psi - max.145 psi
DI water connection =
min. 9 psi - max. 145 psi
Recommended water pressure
Hot + Cold water connection =
over 37 psi - max.145 psi
DI water connection =
over 22 psi - max. 145 psi
to avoid long intake times
– The maximum permissible static
water pressure is 145 psi.
– If the water pressure lies outside the
range of 22-145 psi, please contact
Miele for advice.
64
– The machine is designed for
connection to cold water (blue
marking) and hot water (red marking)
up to 70°C max. Connect the water
intake hoses to the cold and hot
water shut-off faucets. Connect the
intake hose for the steam condenser
(without water control system) to the
cold water faucet.
– If there is no hot water line, the red
marked hose must also be
connected to the cold water line. See
the next page for how to connect the
DI water line ("H
– Water faucets with 3/4" male thread
are to be provided on site. Faucets
and drain connections should be
situated as close to the machine as
possible, and be easily accessible.
– The DN 10 inlet hoses are approx.
5ft. 7" (1.7 m) long terminating in a
3/4" female thread. The water inlet
filters in the threads must not be
removed. Water connection 70
– Large area filters, supplied with the
machine, are to be installed in the
hose attached to the water supply
(see illustration in "Cleaning and
Care - Cleaning the water inlet
filters"). The large surface area filter
for DI water is made of stainless steel
and can be recognized by the matte
surface.
O pur").
2
Advertisement
Table of Contents
