Table of Contents
Advertisement
Repairs should only be carried out by a
qualified and trained person in
accordance with local and national
safety regulations. Unauthorized repairs
could cause personal injury or machine
damage. In the event of any problems
which cannot be corrected, please
contact the Miele Technical Service
Department.
Messages regarding the operating
status of the machine and fault
messages are shown in the display.
The fault table is supplied in the
Programming Manual under
"Messages".
Frequently asked questions
Heater limiter
This machine has a resettable heater
limiter which will shut off the elements in
the event of over-heating. This could be
caused for example, if large articles
cover the heating elements or if the
filters in the wash cabinet are blocked.
If the message "CHECK WASH
CABINET HEATING" is displayed (water
has not heated up in the wash cabinet
and the program takes too long):
^ Isolate and correct the cause of the
problem.
^ Remove the service panel (see
"Electrical connection").
^ Press the RESET button on the
temperature sensor located on the
right side of the machine.
If this switch trips repeatedly,
contact the Miele Technical Service
before using the machine again.
57
Advertisement
Table of Contents
