Table of Contents
Advertisement
Maintenance
Baskets and inserts
To ensure that the mobile units, baskets
and inserts function properly, they must
be checked routinely. A checklist is
supplied with the lab washer.
Check the following points:
– Are the rollers in proper condition,
and are they securely attached to the
basket / insert?
– Are the counter-nuts on the guide
rails firmly secured?
– Is the basket connection correctly
set and firmly screwed on?
– For baskets in the modular system,
are the caps in the module
connection working properly?
– Are all spray jets, spray sleeves, and
hose adapters securely attached to
the basket / insert?
– Are all spray jets, spray sleeves, and
hose adapters unclogged so that
wash water can flow through?
– Are all caps, covers, and fasteners
securely attached to the spray
sleeves?
54
If there are spray arms:
– Do the spray arms rotate freely?
– Are the spray jets clogged? See the
section on "Cleaning and Care /
Cleaning the spray arms".
– Are the magnets in place on the
spray arm ends?
– Are the magnets on the spray arms
free of attached metal parts?
– Are the magnetic strips of the mobile
unit free of any metallic items?
– Are the screws in the magnet rails for
Automatic Mobile Unit Recognition
tightly secured?
In addition to the periodic
maintenance of the lab washer after
1000 operating hours or at least
once a year, the mobile units,
baskets and inserts also need to be
maintained.
See "Maintenance - Routine checks".
Advertisement
Table of Contents
