Drying unit maintenance
How to change the coarse filter
Change coarse filter
If
display, the coarse filter needs to be
replaced.
^ Pull open the control cabinet drawer.
^ Remove the filter mesh at the front of
the drying unit.
appears in the
^ Change the coarse filter. The soft
side of the filter must face the front.
^ Re-insert the filter mesh at the
bottom, then press it into place at the
top.
^ Close the control cabinet drawer.
After changing the coarse filter, you
must reset the operating hours counter.
To do so:
^ Select
CHANGE DS-COARSE
start the program by pressing the h
button.
When the service program has finished,
the display will show a message.
^ Confirm this message with OK.
The system displays the program
overview.
Maintenance
and
55