–
Tighten screw
Guideline
Screw, top steering
stem
S04880-10
–
Tighten screws
Guideline
Screw, top triple
clamp
S04894-13
–
Position the brake caliper, and mount and tighten screws
Guideline
Screw, front
brake caliper
–
Mount the cable ties.
–
Position the brake line, the wiring harness, and the clamp.
Mount and tighten screws
E00375-13
Finishing work
–
Mount the handlebar cushion.
–
Install front fender. (
–
Install the front wheel.
–
Install the headlight mask with the headlight. (
–
Check that the wiring harness, throttle cables, and brake and
clutch lines can move freely and are routed correctly.
–
Check the steering head bearing for play. (
–
Remove the motorcycle from the lift stand. (
–
Check the headlight setting. (
SERVICE WORK ON THE CHASSIS 12
8
.
M8
20 Nm (14.8 lbf ft)
9
.
M8
20 Nm (14.8 lbf ft)
M8
25 Nm (18.4 lbf ft)
bl
.
p. 77)
(
p. 110)
p. 126)
bk
.
Loctite
®
243™
p. 124)
p. 74)
p. 64)
71