Table of Contents
Advertisement
12 SERVICE WORK ON THE CHASSIS
70
–
Position the upper triple clamp with the handlebar.
–
Position the clutch line and the wiring harness.
–
Mount screw
E00921-11
–
Position the combination instrument holder, and mount and
tighten screws
Guideline
Remaining screws,
chassis
S03514-11
–
Position the fork legs.
Bleeder screws
Info
The rebound damping is located in right fork leg REB
(red adjuster). The compression damping is located in
left fork leg COMP (white adjuster).
Grooves are milled into the side of the upper end of the
fork legs. The second milled groove (from the top) must
be flush with the upper edge of the upper triple clamp.
S04824-14
–
Tighten screws
Guideline
Screw, bottom triple
clamp
S04894-12
–
Tighten screw
Guideline
Screw, top steering
head
S04879-10
4
, but do not tighten yet.
5
.
M6
6
are positioned toward the front.
7
.
M8
4
.
M20x1.5
10 Nm (7.4 lbf ft)
15 Nm (11.1 lbf ft)
12 Nm (8.9 lbf ft)
Advertisement
Table of Contents
