Hpe 5130 48G Poe+ 4Sfp+ 1-Slot Hi - HPE JH323A Installation Manual

HPE 5130 48G PoE+ 4SFP+ 1-slot HI

Figure 52 HPE 5130 48G PoE+ 4SFP+ 1-slot HI front panel
(1) 10/100/1000Base-T autosensing Ethernet port
(3) Management Ethernet port
(5) Mini USB console port
(7) USB port
(9) SFP+ port
(11) Interface card status LED (SLOT)
(13) Power supply 1 status LED (PWR1)
(15) Management Ethernet port LED
Figure 53 HPE 5130 48G PoE+ 4SFP+ 1-slot HI rear panel
1
(1) Grounding screw
(3) Fan tray 1
(5) Power supply 1
The HPE 5130 48G PoE+ 4SFP+ 1-slot HI switch comes with power supply slot 1 empty and power
supply slot 2 installed with a filler panel. You can install one or two power supplies for the switch as
required. In this figure, two PSR720-56A (JG544A) AC power supplies are installed in the power
supply slots. For more information about installing and removing a power supply, see
"Installing/removing a power
The HPE 5130 48G PoE+ 4SFP+ 1-slot HI switch comes with a filler panel in the interface card slot.
You can select an interface card for the switch as required. In this figure, an LSWM2SP2PM interface
card is installed in the interface card slot. For more information about installing and removing an
interface card, see
2 3
supply."
"Installing/removing an interface
(2) 10/100/1000Base-T autosensing Ethernet port
LED
(4) Console port (CONSOLE)
(6) Port LED mode switching button
(8) System status LED (SYS)
(10) LED for the port LED mode (MODE)
(12) Power supply 2 status LED (PWR2)
(14) SFP+ port LED
4
(2) Interface card (optional)
(4) Fan tray 2
(6) Power supply 2 (optional)
card."
47
5 6