Fuel Filter Cartridge Replacement; Air Filter Cartridge Replacement - Kohler KDI 2504TM Owner's Manual

6
5. Fit and tighten the cover A on the oil filter support F,
tightening it with a torque wrench G (tightening torque of
25 Nm).

6.3 Fuel filter cartridge replacement

1. Procure a suitable container to collect the fuel.
2. Rotate the filter A to take it to the unlocked position and
remove it.
3. Lubricate the gasket C of the new cartridge. Assemble
the new filter A on the support B and rotate it until reaches
the lock position.
• Do not fill the new cartridge A with fuel.
4. Turn the key on the control
panel to the ON position.
The electric pump D sends
fuel to the filter B and then
the injection pump
The air inside the circuit
and the filter will begin to
escape from the screw F
and E.
5. Loosen the air bleeding
screw F on fuel filter
bracket B and the screw
E on the injection pump G.
6. Tighten the bleeding screw
F and E (tightening torque
of 1.5 Nm) when the fuel
begins to flow.

6.4 Air filter cartridge replacement

NOTE: Component not necessarily supplied by
KOHLER.
1. Release the two fastenings F of the cover A.
2. Remove the cartridge B.
3. Reinstall:
-
the new cartridge B.
- the cover A checking the right tightness of fastenings F.
EN
32
INFORMATION ABOUT REPLACEMENTS
Important
G.
6.9
F
6.7
A
6.8
G
F
D
A
F B
6.10
A
B
C
A
E
G
_07
ED0053030260 _08
Index