Replacing The Rubber Feet; Procedure; Post-Requisites - Dell Inspiron 20 3000 Service Manual

Replacing the rubber feet

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Align the screw holes on the rubber feet with the screw holes on the display
bezel.
2 Replace the screws that secure the rubber feet to the display bezel.

Post-requisites

1 Follow the procedure in step 2 to step 6 in
2 Replace the system
3 Replace the wireless
4 Replace the speakers.
5 Replace the memory
6 Replace the heat
7 Replace the fan.
8 Replace the system-board
9 Follow the procedure in step 3 to step 7 in
10 Replace the back
11 Follow the procedure in step 4 in
12 Replace the stand.
82
computer. After working inside your computer, follow
After working inside your
board.
card.
module.
sink.
shield.
cover.
"Replacing the optical
computer. For more safety best
www.dell.com/
"Replacing the display
"Replacing the hard-drive".
drive".
Before
assembly".