Replacing the rubber feet
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align the screw holes on the rubber feet with the screw holes on the display-
assembly base.
2
Replace the four screws (M3x5 black) that secure the rubber feet to the display-
assembly base.
Post-requisites
1
Replace the
back
2
Replace the stand.
86
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before