Clearing Forgotten Passwords
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the stand.
2
Follow the procedure from step 1 to step 2 in
3
Remove the
back
4
Remove the
system-board
Procedure
1
Locate the password reset jumper (PSWD) on the system board.
NOTE: For more information on the location of CMOS and password
reset jumper, see
2
Remove the jumper plug from the default jumper-pins and connect it to the
password jumper-pins.
3
Wait for 5 seconds and then replace the jumper plug in its original location.
1
jumper plug
3
password jumper-pins
84
computer. After working inside your computer, follow
After working inside your
cover.
shield.
"System-board
computer. For more safety best
"Removing the optical
components".
2
default jumper-pins
Before
www.dell.com/
drive".