Replacing The Rubber Feet; Procedure; Post-Requisites - Dell Inspiron 20 3000 Series Service Manual

WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1 Align the screw holes on the rubber feet with the screw holes on the display
bezel.
2 Replace the screws that secure the rubber feet to the display bezel.
Post-requisites
1 Follow the procedure in step 2 to step 5 in
2 Replace the system
3 Replace the wireless
4 Replace the speakers.
5 Replace the memory
6 Replace the heat
7 Replace the system-board
8 Follow the procedure in step 3 to step 7 in
9 Replace the battery.
10 Replace the back
11 Replace the stand.

Replacing the rubber feet

computer. After working inside your computer,
After working inside your
board.
card.
module.
sink.
shield.
cover.
computer. For more safety
"Replacing the display
"Replacing the hard
Replacing the rubber feet
37
assembly".
drive".
77