Removing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the stand.
2
Follow the procedure from step 1 to step 2 in
3
Remove the
back
4
Remove the
system-board
Procedure
1
Disconnect the speaker cable from the system board.
2
Note the routing of the speaker cable and the position of the rubber grommets
on the computer bezel.
computer. After working inside your computer, follow
After working inside your
cover.
shield.
computer. For more safety best
www.dell.com/
"Removing the optical
Before
drive".
63