Emergency Stop Switch; Making Operation Easier - Husqvarna HTC T5 Operator's Manual

HTC T5
Start the dust extractor, if dry grinding is to be done.
Choose direction of rotation (3).
Set the speed for the grinding discs using the knob (4).
Start the grinding by pressing on (5).
When the machine is not in use, press on/off for 3 seconds, to switch the machine off.

6.2 Emergency Stop Switch

The emergency stop switch should only be used in an emergency, because it shortens the
service life of the machine's electrical components.
When the emergency stop switch is pressed, the power to all electrical moving parts on the
machine is turned off. Reset by turning the switch clockwise. The machine can then be
restarted.

6.3 Making Operation Easier

38
WARNING
Risk for personal injury.
Do not let the cable come into contact with the rotating tools.
TIP
By arranging the hose and cable as shown in the picture, you
avoid disruptive stoppages caused by having to re-position the
cable and hose.
Grinding
D004753, 01.01