Manual Driving; Emergency Stop Switch - Husqvarna HTC T6 Operator's Manual

HTC T6/RT6/X6/RX6

6.1.1 Manual Driving

Make sure the emergency stop switch (1) is not activated. If not, turn clockwise according to
arrows on the switch.
Press the button
Start the dust extractor, if dry grinding is to be done.
Choose direction of rotation (3).
Set the speed for the grinding discs using the knob (4).
Start the grinding by pressing on (5).
When the machine is not in use, press on/off for 3 seconds, to switch the machine off.

6.1.2 Emergency Stop Switch

The emergency stop switch should only be used in an emergency, because it shortens the
service life of the machine's electrical components.
When the emergency stop switch is pressed, the power to all electrical moving parts on the
machine is turned off. Reset by turning the switch clockwise. The machine can then be
restarted.
D002998, 02.00
on/off (2).
Grinding
39