Specifications - Makita BPT350 Instruction Manual

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Trigger
2-2. Lever
3-1. Sliding door
4-1. Lever
5-1. Trigger
6-1. Bolts
6-2. Driver guide cover

SPECIFICATIONS

Pin nail magazine capacity
Dimensions (L x W x H)
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for pressing pin nails into
construction materials such as timbers.
Noise
The typical A-weighted noise level determined according
to EN60745:
Model BPT350
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Model BPT351
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
Vibration
The vibration total value determined according to
EN60745:
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Explanation of general view
7-1. Lamp
7-2. Lever
8-1. Driver guide
8-2. Pin nails
8-3. Magazine
8-4. Lock lever
9-1. Driver guide cover
9-2. Protrusion
9-3. Nose adapter
9-4. Holder
Model
Pin nail size
Net weight
Rated voltage
) : 75 dB(A)
pA
) : 74 dB(A)
pA
2
) : 2.5 m/s or less
h
2
BPT350
0.6 x 18, 25, 30, 35 mm
130 pcs
227 mm x 79 mm x 245 mm
2.0 kg
D.C. 14.4V
ENE068-1
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
ENG905-1
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
ENG904-2
EC Declaration of Conformity
We Makita
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Pin Nailer
Model No./ Type: BPT350, BPT351
are of series production and
3
11-1. Groove
11-2. Hook
11-3. Screw
12-1. Hex wrench
13-1. Trigger
13-2. Material to be fastened
15-1. Bolt (B)
15-2. Driver guide cover
15-3. Bolt (A)
BPT351
0.6 x 18, 25, 30, 35 mm
130 pcs
227 mm x 79 mm x 249 mm
1.9 kg (with battery BL1815)
2.1 kg (with battery BL1830)
D.C. 18V
Corporation as the
ENG901-1
ENH101-15
responsible