Makita LXTP01 1 Series Technical Information
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Nail Gun
  5. LXTP01 1 Series
  6. Technical information
Makita LXTP01 1 Series Technical Information

Makita LXTP01 1 Series Technical Information

Cordless pin nailer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
T
ECHNICAL INFORMATION
Models No.
Description
C
ONCEPT AND MAIN APPLICATIONS
Model BPT351 has been developed as a 18V Cordless Pin Nailer
with more working capacity than that of 14.4V Model BPT350.
Its features and benefits are the same as BPT350
except for 18V Li-ion battery.
This model is available in the following variations.
Model No.
Charger
BPT351RFE
(LXTP01)
DC18RA
BPT351RFX
BPT351Z
(LXTP01Z)
No
BPT351ZX
All models also include the accessories listed below in "Standard equipment".
S
pecification
Specifications
Voltage: V
Capacity: Ah
Battery
Energy capacity: Wh
Cell
Charging time: min.
Length: mm (")
Pin nails
(23Ga)
Diameter: mm (")
Magazine capacity: pcs.
Weight according to
EPTA-Procedure 01/2003: kg (lbs)
*2 with battery BL1815
*3 with battery BL1830
S
tandard equipment
Safety goggles ......................... 1
Nose adapter ............................ 1
Hex wrench 3 .......................... 1
Belt clip ................................... 1
Note: The standard equipment for the tool shown above may vary by country.
O
ptional accessories
Pin nails; 18mm (11/16"), 25mm (1"), 30mm (1-3/16"), 35mm (1-3/8")
Fast Charger DC18RA
Li-ion Battery BL1815
Li-ion Battery BL1830
BPT351 (LXTP01*
)
1
Cordless Pin Nailer
Model number for North and Central American countries
*1
Battery
Type
Quantity
BL1830
2
No
No
Model No.
BPT351 (LXTP01)
(11/16, 1, 1-3/16, 1-3/8)
1.9*
Plastic
Systainer
carrying case
case
Yes
No
No
Yes
No
No
Yes
18
1.3/ 3.0
24/ 54
Li-ion
22 with DC18RA
18, 25, 30, 35
0.6 (1/32)
130
/ 2.1*
(4.2*
/ 4.6*
)
2
3
2
3
PRODUCT
P 1/ 15
L
H
Dimensions: mm (")
Length (L)
249 (9-3/4)
Width (W)
79 (3-1/8)
Height (H)
227 (8-15/16)
W

Advertisement

Table of Contents
loading

Related Manuals for Makita LXTP01 1 Series

Summary of Contents for Makita LXTP01 1 Series

  • Page 1 ECHNICAL INFORMATION PRODUCT P 1/ 15 Models No. BPT351 (LXTP01* Description Cordless Pin Nailer Model number for North and Central American countries ONCEPT AND MAIN APPLICATIONS Model BPT351 has been developed as a 18V Cordless Pin Nailer with more working capacity than that of 14.4V Model BPT350. Its features and benefits are the same as BPT350 except for 18V Li-ion battery.

  • Page 2: Necessary Repairing Tools

    Item No. Description Portion to apply adhesive M6 Hex nut Thread Loctite 272 a little Fig. 1 : Makita grease N No.2 : Molybdenum disulfide lubricant : Loctite 272 Compression spring 17 Spring holder Hammer Spur gear 27 (3pcs.) Holder Screw with Loctite 272 put on the thread.
  • Page 3 P 3/ 15 epair [3] DISASSEMBLY/ASSEMBLY [3] -1. Replacing Driver (1) Remove four Bind PT3x16 Tapping screws and Front cover. (Fig. 2) (2) Remove Upper plate as drawn in Fig. 3. (3) Remove Pin 4 for connecting Driver and Hammer. (Fig. 4) (4) Remove Driver as drawn in Fig.

  • Page 4: Replacing Motor

    P 4/ 15 epair Fig. 9 [3] DISASSEMBLY/ASSEMBLY [3] -2. Replacing Switch, LED circuit and Terminal Hold trigger section so as not to spring out. Bind PT3x16 Tapping (1) Do the steps (1), (2), (3) and (4) of the previous page. screw for Housing L and R (2) Insert Battery and pull the trigger to locate Hammer at (8pcs.)

  • Page 5: Trigger Section

    P 5/ 15 epair [3] DISASSEMBLY/ASSEMBLY [3] -4. Trigger Section DISASSEMBLING (1) Remove Front cover and Housing R. (Fig. 2 and Fig. 9) (2) Remove the parts around trigger section in the following order. (Fig. 13) 1. Safety trigger 2. Light switch arm 3. Link plate 4. Torsion spring 4 5. Pin 2.5 (3pcs.) 6. Pin 3 (3) Disassemble guide plate in order of Figs.
  • Page 6 P 6/ 15 epair [3] DISASSEMBLY/ASSEMBLY [3] -5. Spring Section (cont.) DISASSEMBLING (3) Disassemble the Spring section in order of Fig. 19, 22. Spring section is removed as drawn in Fig. 23. Fig. 19 Fig. 20 Guide bolt Cushion Wrench 8 Rail Turn guide bolt counterclockwise while gripping holder by a gloved...
  • Page 7 P 7/ 15 epair [3] DISASSEMBLY/ASSEMBLY [3] -6. Spring section (cont.) ASSEMBLING (1) Take the reverse steps of the disassembling procedure for Spring section. (2) Fix Spur gear 55 complete with Flat washer 4 and Bind PT3x16 Tapping screw. Install Spring section in Housing L while adjusting Roller position of Spur gear 55 complete to under the hook portion of hammer (Fig.
  • Page 8 (1) Assemble Cam block section to Spur gear 55 complete. (Fig. 26) Usually, there is no need to disassemble Cam block section for repair. Note: Put Makita grease N No.2 to the inner and the outer surface of Internal gear 69, the pins of Spur gear 7 complete and the teeth of Spur gear 55 complete.
  • Page 9 P 9/ 15 epair [3] DISASSEMBLY/ASSEMBLY [3] -6. Switch Mechanism Fig. 32 ASSEMBLING Guide plate (1) Insert Guide plate and Compression spring 4 into Trigger. (Fig. The groove (2) Hook the short end of Torsion spring 3 with Swing arm, and then insert the Compression of Guide plate Torsion spring 3 into Swing arm.
  • Page 10 P 10/ 15 epair Fig. 38 [3] DISASSEMBLY/ASSEMBLY [3] -6. Switch Mechanism (cont.) Pin 2.5 ASSEMBLING (Ref. Figs. 34 and 35) (7) Insert the remaining two Pins 2.5 firmly into Housing set L until they stop as drawn in Fig. 38. Pin 2.5 (2pcs.) (8) Install Link plate to Housing L with Pin 3 through Link plate.
  • Page 11 P 11/ 15 epair [3] DISASSEMBLY/ASSEMBLY [3] -7. Magazine DISASSEMBLING (1) Loosen M4x6 Hex socket head bolt three turns, then pull out Upper rail section from Magazine . (Fig. 44) (2) Remove large Compression spring 3 that is put on Nail guide holder. (Fig. 45) (3) Remove Stopper with small Compression spring 3 from Pusher.
  • Page 12 P 12/ 15 epair [3] DISASSEMBLY/ASSEMBLY [3] -7. Magazine (cont.) Points of ASSEMBLING • Be sure to check that Nail stoppers work properly as drawn in Figs. 50 and 51. Fig. 50 Nail guide holder Nail stoppers are in Nail guide holder. Pusher Nail guide holder When Nail guide holder...

  • Page 13: Fastening Torque

    P 13/ 15 epair [3] DISASSEMBLY/ASSEMBLY [3] -8. Fastening Torque Item No. Description Fastening Torque M4x14 Hex socket head bolt for assembling Driver guide and Magazine 2.5 N.m M4x6 Hex socket head bolt for assembling Driver guide and Driver guide cover 4.0 N.m M4x10 Hex socket head bolt for assembling Driver guide and Holder 4.0 N.m...

  • Page 14: Wiring Diagram

    P 14/ 15 iring diagram Fig. D-2 Wiring to Switch Flag connector Lead wire (orange) Housing L side Connect Flag connector to Switch at direction described above. Fig. D-3 Wiring to DC motor Red marking for distinction of + Terminal Terminal with Red marking Flag connector...
  • Page 15 P 15/ 15 iring diagram Fig. D-5 Switch put under ON-OFF Switch Boss A (for Upper dead point detection) Lead wire (red) to + Terminal of Switch (for ON-OFF) DC motor Guide Lead wire (red) of Upper dead point detection switch to DC motor while passing the wire between boss A and lead wire holder A.

This manual is also suitable for:

Bpt351 seriesBpt351rfeBpt351rfxBpt351zBpt351zxLxtp01 ... Show all

Table of Contents