GreenWorks Pro SNC407 Operator's Manual page 12

EN
2. Remove the nut (27).
3. Remove the 5 screws (24) and side wear pad(26) that
secure the left side cover (31).
4. Remove the belt (28).
5. Using a socket wrench, remove the large pulley (29).
English
6. Remove the screws (24) that secure the left side plate.
7. Pull the axle (30) and remove the old impeller, install the
new impeller.
8. Reinstall the nut (27) and right side cover.
32
29
9. Reinstall the left side plate (32), large pulley (29), belt
(28) and left side cover (31).
12
24
30
27
27
28
31 26
24