Table of Contents
Advertisement
en Shelf supports
Push the retainer
2.
upper bar.
Keep the PUSH tab pushed in
3.
out rail inwards until the front retainer
between the two bars
Release the PUSH tab.
‒
a The retainer
clicks into place.
Pull the pull-out rail out as far as it will go and slide
4.
it back in.
26
in between the lower and the
and swing the pull-
is located
.
18.5 Detaching the rails in the top cooking
compartment
WARNING ‒ Risk of burns!
The shelf supports get very hot
Never touch the shelf supports when hot.
▶
Always allow the appliance to cool down.
▶
Keep children at a safe distance.
▶
Lift the rail forwards slightly
1.
Pull the rail to the front
2.
18.6 Attaching the rails in the top cooking
compartment
Notes
¡ The rails only fit on the right or left.
¡ For both shelf supports, ensure that the hooks that
are attached at the rear are pointing upwards.
First, push the rail into the middle of the rear
1.
socket until the rail rests against the cooking
compartment wall, and then push this back
Push the rail into the front socket
2.
also rests against the cooking compartment wall,
and then press this downwards
and detach it
.
and remove it
.
.
until the rail
.
Advertisement
Table of Contents
