Installation - Zanussi ZGG65414XA User Manual

Labels supplied with the accessories
bag
Stick the adhesive labels as indicated below:
A
MOD.
PROD.NO.
SER.NO
DATA
A) Stick it on Guarantee Card and send this
part (if applicable).
B) Stick it on Guarantee Card and keep this
part (if applicable).

Installation

WARNING!
Refer to Safety chapters.
Before the installation
Before you install the hob, write down the
information bellow from the rating plate. The
rating plate is on the bottom of the hob.
Model .......................................
PNC .........................................
Serial number ...........................
10
B
MOD.
PROD.NO.
SER.NO
03 IT
DATA
MADE IN ITALY
C
MOD.
PROD.NO.
SER.NO.
0049
C) Stick it on instruction booklet.
Gas Connection
WARNING!
The following instructions about
installation, maintenance and
ventilation must be carried out by
qualified personnel in compliance
with the regulation in force (UNI-CIG
7129 - 7131). Make sure that the
kitchen is well ventilated: keep
natural ventilation holes open (at
least 100 cm²) or install a
mechanical extractor hood.
Choose fixed connections or use a flexible pipe
in stainless steel in compliance with the
regulation in force. If you use flexible metallic
pipes, be careful they do not come in touch with
mobile parts or they are not squeezed. Also be
careful when the hob is put together with an
oven.
TYPE
IP20
www.zanussi.com