Zanussi ZGG65414 User Manual
Hide thumbs
Also See for ZGG65414:
- User manual (16 pages) ,
- User manual (21 pages) ,
- User manual (16 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZGG65414
Summary of Contents for Zanussi ZGG65414
- Page 1 User Manual ZGG65414...
-
Page 2: Table Of Contents
Children of less than 3 years should be kept away unless • continuously supervised. General Safety The appliance and its accessible parts become hot during use. • Do not touch the heating elements. Do not operate the appliance by means of an external timer or • separate remote-control system. www.zanussi.com... -
Page 3: Safety Instructions
• All electrical connections should be made by • Seal the cut surfaces with a sealant to a qualified electrician. prevent moisture to cause swelling. • The appliance must be earthed. • Protect the bottom of the appliance from steam and moisture. www.zanussi.com... -
Page 4: Gas Connection
• Before installation, make sure that the local WARNING! distribution conditions (nature of the gas and Risk of damage to the appliance. gas pressure) and the adjustment of the • Do not keep hot cookware on the control appliance are compatible. panel. www.zanussi.com... -
Page 5: Product Description
• Do not let acid liquids, for example vinegar, • Use original spare parts only. lemon juice or limescale remover, touch the hob. This can cause matt patches. Product description Cooking surface layout Semi-rapid burner Rapid burner Auxiliary burner Control knobs www.zanussi.com... -
Page 6: Daily Use
The again after minimum 1 minute. manufacturer declines any responsibility in case of the flame The spark generator can start misuse. automatically when you switch on the mains, after installation or a power cut. It is normal. www.zanussi.com... -
Page 7: Hints And Tips
• Wash stainless steel parts with water, and then dry them with a soft cloth. 2. The enamel coating occasionally can have rough edges, so be careful when you wash the pan supports by hand and dry them. If www.zanussi.com... -
Page 8: Periodic Maintenance
10 seconds. The flame ring is uneven. Burner crown is blocked with Make sure that the injector is not food residues. blocked and the burner crown is clean. www.zanussi.com... -
Page 9: Installation
If you use flexible metallic pipes, be careful they do not come in touch with mobile parts or they are not squeezed. Also be careful when the hob is put together with an oven. www.zanussi.com... -
Page 10: Electrical Connection
When installation is complete, make power on the rating plate agree with the sure that the seal of each pipe fitting voltage and the power of the local power is correct. Use a soapy solution, not supply. a flame! www.zanussi.com... -
Page 11: Possibilities For Insertion
2 cm longer than the brown (or black) phase 30 mm wire. Building In min 20 mm (max 150 mm) 60 mm min. 650 mm min. 100 mm min. 55 mm 30 mm 560 mm A) Removable panel B) Space for connections www.zanussi.com... -
Page 12: Technical Information
230 V ~ 50 Hz Appliance category: II2H3+ Gas connection: G 1/2" Appliance class: Gas burners for NATURAL GAS G20 20 mbar BURNER NORMAL POWER kW MINIMUM POWER kW INJECTOR MARK 1/100 mm Rapid 0,75 Semi-rapid 0,45 Auxiliary 0,33 www.zanussi.com... -
Page 13: Energy Efficiency
Return the product to your the packaging in applicable containers to local recycling facility or contact your municipal recycle it. Help protect the environment and office. human health and to recycle waste of electrical and electronic appliances. Do not dispose www.zanussi.com... - Page 14 www.zanussi.com...
- Page 15 www.zanussi.com...
- Page 16 www.zanussi.com/shop...