Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZGG65414SA
Summary of Contents for Zanussi ZGG65414SA
- Page 1 User manual Gas hob ZGG65414...
-
Page 2: Table Of Contents
• The cookware must not enter the control use. Do not remove the rating plate. It can in- zone. validate the guarantee. • Make sure that the cookware does not pro- trude over the edges of the cooking surface www.zanussi.com... - Page 3 • Carefully obey the instructions for electrical • Fully obey the laws, ordinances, directives connections. There is the risk of injury from and standards in force in the country where electrical current. www.zanussi.com...
-
Page 4: Installation
20 m³. If it is The minimum distance combustible material installed in a room of volume less than 5 m³ an can be fitted above the hob in line with the www.zanussi.com... - Page 5 R 1/2 (1/2 BSP male thread). When the final connection has been made, it is 2. Turn the knob on the minimum position. essential that a thorough leak test is carried out 3. Remove the knob. on the hob and installation. www.zanussi.com...
- Page 6 • The power cable must not touch any hot parts. • The electrical installation must have an isola- tion device which lets you disconnect the ap- pliance from the mains at all poles. The isola- www.zanussi.com...
- Page 7 A cut off plug put technical assistance intervention is necessary. into a 13 amp socket is a safety hazard. There is a risk of electrical shock. www.zanussi.com...
-
Page 8: Product Description
Warning! Be very careful when you use open fire in kitchen environment. To light the burner: Manufacturer decline any responsibility in case 1. Turn the control knob counterclockwise to misuse of the flame the maximum position ( ) and push it down. www.zanussi.com... -
Page 9: Helpful Hints And Tips
Rapid 180 - 260 mm cooktop and that pots are centrally positioned Front Semi-rap- 120 - 180 mm on the rings in order to achieve maximum stability and to obtain lower gas consumption. www.zanussi.com... -
Page 10: Care And Cleaning
Keep these • To make the burners work correctly, make components well clean to prevent difficult light- sure that the arms of the pan supports are in the centre of the burner. www.zanussi.com... -
Page 11: What To Do If
5 seconds. The gas ring burns unevenly • Burner crown is blocked with • Make sure that the injector is food residues not blocked and the burner crown is clear of food particles. www.zanussi.com... -
Page 12: Technical Data
Auxiliary burner: 1.0 kW Length: 510 mm TOTAL POWER: G20 (2H) 20 mbar = 8 Hob recess dimensions G30 (3+) 28-30 mbar = 567 g/h Width: 560 mm G31 (3+) 37 mbar = Length: 480 mm 557 g/h Heat input www.zanussi.com... -
Page 13: Environment Concerns
>PE<,>PS<, etc. Discard the packaging mate- otherwise be caused by inappropriate waste rials as household waste at the waste disposal handling of this product. For more detailed facilities in your municipality. www.zanussi.com... - Page 14 www.zanussi.com...
- Page 15 www.zanussi.com...
- Page 16 www.zanussi.com/shop...