Advertisement
Advertisement
Table of Contents
Related Manuals for Zanussi ZGL62IT
Summary of Contents for Zanussi ZGL62IT
- Page 1 User manual Gas hob ZGL62IT...
-
Page 2: Table Of Contents
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7 Operation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8 Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8... - Page 3 damage to property caused by failure to obey these re- quirements. • To prevent the risks of structural damage or physical injury, installation, connection of the appliance to the power supply and gas system, setting up and mainte- nance must only be done by qualified personnel in compliance with standards and local regulation force.
-
Page 4: Installation
Installation Warning! The following instructions about installation, connection and maintenance must be carried out by qualified personnel in compliance with standards and local regulations in force. Important safety requirements This hob must be installed in accordance with the Gas Safety (Installation and Use) Regulations (Current Edition) and the IEE Wiring Regulations (Current Edition). - Page 5 Important! Failure to ensure the correct assembly will cause leakage of gas. Important! Make sure that the gas supply pressure of the appliance obeys the recommended values. Rigid connection: Carry out connection by using metal rigid pipes (copper with mechanical end). Injectors replacement 1.
- Page 6 Green and Yellow 3 amp fuse Brown Cord clamp Blue Should the plug need to be replaced for any reason, the wires in the mains lead are coloured in accordance with the following code: Green and Yellow - Earth Blue - Neutral Building In min.
-
Page 7: Product Description
30 mm min 20 mm (max 150 mm) MANUFACTURER: ELECTROLUX ITALIA S.p.A. C.so Lino Zanussi, 30 33080 PORCIA (PN) - ITALIA Semi-rapid burner Semi-rapid burner Control knobs Auxiliary burner Rapid burner... -
Page 8: Operation
Operation Ignition of the burner Warning! Be very careful when you use open fire in kitchen environment. Manufacturer decline any responsibility in case misuse of the flame Always light the burner before you put cookware. To light the burner: 1. Turn the control knob counterclockwise to the maxi- mum position ( ) and push it down. -
Page 9: Care And Cleaning
Warning! Flame diffuser are not recommended. Information on acrylamides Important! According to the newest scientific knowledge, if you brown food (specially the one which contains starch), Care and cleaning Warning! Switch the appliance off and let it cool down before you clean it. Disconnect the appliance from the electrical supply, before carrying out any cleaning or maintenance work. -
Page 10: Technical Data
Problem The flame is blow out immediately af- ter ignition The gas ring burns unevenly If there is a fault, first try to find a solution to the problem yourself. If you cannot find a solution to the problem yourself, speak your dealer or the local Service Force Centre. -
Page 11: Environment Concerns
Hob recess dimensions Width: Length: Heat input Rapid burner: Semi-rapid burner: Auxiliary burner: TOTAL POWER: G20 (2H) 20 mbar = 8 kW G30 (3+) 28-30 mbar = G31 (3+) 37 mbar = 557 Electric supply: 3 core flexible cable with non rewireable plug fitted with a 3 amp cartridge Gas burners... - Page 12 your local council, your household waste disposal service or the shop where you purchased the product. Packaging material The packaging materials are friendly to the environ- ment and can be recycled. The plastic components are identified by marking: >PE<,>PS<, etc. Discard the packaging materials as household waste at the waste dis- posal facilities in your municipality.
- Page 16 www.zanussi.com/shop...