Wireless - Smart Connect Disabled - D-Link DIR-895L User Manual
Ac5300 ultra wi-fi router
Hide thumbs
Also See for DIR-895L:
- Quick installation manual (37 pages) ,
- Manual (8 pages) ,
- Quick install card (2 pages)
Table of Contents
Advertisement
Section 4 - Configuration - Extender Mode
If Smart Connect is Disabled the following options are available:
2.4GHz / Primary 5GHz / Secondary 5GHz
Status:
Enable or disable the 2.4 GHz and 5 GHz wireless networks.
Wi-Fi Name (SSID):
Create a name for your wireless network using up to 32 characters.
Password:
Create a password to use for wireless security.
Advanced Settings
Security Mode:
Choose None, WEP, or WPA/WPA2-Personal (recommended).
802.11 Mode
Select the desired wireless networking standards to use.
(2.4 GHz):
The available options for the 2.4 GHz wireless network are Mixed
802.11b/g/n, Mixed 802.11g/n, 802.11n only.
802.11 Mode
Select the desired wireless networking standards to use.
The available options for the 5 GHz wireless network are Mixed
(5 GHz):
802.11a/n/ac, Mixed 802.11n/ac, 802.11ac only, Mixed 802.11a/n,
Mixed 802.11n only, or 802.11a only.
Select the desired channel. The default is Auto (recommended).
Wi-Fi Channel:
Transmission
Select the desired wireless transmission power.
Power:
Channel Width
Select Auto 20/40 MHz if you are using both 802.11n and non-
(2.4 GHz):
802.11n devices, or select 20 MHz if you are not using any 802.11n
devices.
D-Link DIR-895L User Manual
Wireless - Smart Connect Disabled
Home
DIR-895L HW:A1
FW:1.12
Wireless
Use this section to configure the wireless settings for your D-Link Router. Please make sure that any
changes made in this section will need to be updated on your wireless device.
Settings >> Wireless
Smart Connect
Disabled
Smart Connect:
2.4GHz
Status:
Enabled
Wi-Fi Name (SSID):
Your_2.4G_Wi-Fi_Network
Password:
A_Str0nG_P@ssW0rd!%!
Security Mode:
WPA/WPA2-Personal
802.11 Mode:
Mixed 802.11b/g/n
Wi-Fi Channel:
Auto
Transmission Power:
High
Channel Width:
Auto 20/40 MHz
HT20/40 Coexistence:
Enabled
Visibility Status:
Visible
Schedule:
Always Enable
Primary 5GHz
Status:
Enabled
Wi-Fi Name (SSID):
Your_Primary_5G_Wi-Fi_Network
Password:
A_Str0nG_P@ssW0rd!%!
Security Mode:
WPA/WPA2-Personal
802.11 Mode:
Mixed 802.11a/n/ac
Wi-Fi Channel:
Auto
Transmission Power:
High
Channel Width:
Auto 20/40/80 MHz
Visibility Status:
Visible
Schedule:
Always Enable
Settings
Management
Save
Advanced Settings ...
⌵
⌵
⌵
⌵
⌵
⌵
⌵
Advanced Settings ...
⌵
⌵
⌵
⌵
⌵
⌵
⌵
108
Advertisement
Table of Contents
