Hardware Setup - D-Link DIR-895L User Manual

Section 3 - Installation - Router
1. The DIR-895L is designed to give you the fastest, most stable network connection possible. In order to maximize performance, fully extend
the antennas to provide optimal wireless coverage. Keep the router in an open area for better wireless coverage. Inspect the mode switch
to ensure that it is in the factory default ROUTER position. Adjust the switch if necessary.
2. Position your DIR-895L near your Internet-connected modem. Place it in an open area for better wireless coverage.
3. Turn off and unplug the power and Ethernet cable to your cable or DSL broadband modem. This is required. In some cases, you may need
to turn it off for up to five minutes.
D-Link DIR-895L User Manual

Hardware Setup

45°
DIR-895L
DIR-895L
DIR-895L
Modem
Modem
15