Settings; Wizard; Internet - D-Link DIR-895L User Manual

Section 4 - Configuration - Router Mode
In the Settings menu on the bar on the top of the page, click Wizard to open the setup wizard. This is the same wizard that appears when you start
the router for the first time. Refer to Setup Wizard on page 20 for details.
In the Settings menu on the bar on the top of the page, click Internet to see the Internet configuration options.
My Internet
Choose your Internet connection type from the drop-down menu. You
Connection Is: will be presented with the appropriate options for your connection
type.
For Dynamic IP (DHCP) refer to page 41.
For Static IP refer to page 42.
For PPPoE refer to page 43.
For PPTP refer to page 45.
For L2TP refer to page 47.
For DS-Lite refer to page 49.
To configure an IPv6 connection, click the IPv6 link. Refer to page 52.
D-Link DIR-895L User Manual

Settings

Wizard

Internet

Home Settings
DIR-895L HW:A1 FW:1.12
Internet
Use this section to configure your Internet Connection type. There are several connection types to choose
from Static IP, DHCP, PPPoE, PPTP, L2TP and DS-Lite. If you are unsure of your connection method,
please contact your Internet service provider. Note: If using the PPPoE option, you will need to remove or
disable any PPPoE client software on your computers.
Settings >> Internet
My Internet Connection is:
Static IP
Dynamic IP (DHCP)
PPPoE
PPTP
L2TP
DS-Lite
COPYRIGHT © 2016 D-Link
Features Management
IPv6 Save
Advanced Settings ...
40