Configuration - Router Mode - D-Link DIR-895L User Manual

Section 4 - Configuration - Router Mode
To access the configuration utility, open a web browser such as Internet Explorer and enter
http://dlinkrouter.local./ or you may also connect by typing the IP address of the router
(by default this is http://192.168.0.1) in the address bar.
Enter your password. If you previously followed the setup wizard, please use the admin
password you entered during the wizard. Otherwise, leave the password blank. Click Log
In to proceed.
Note: If you cannot remember your password and cannot log in, press the reset button on the
back of the device for longer than 10 seconds to restore the router to its default settings.
If you are having trouble logging in or experiencing trouble with the configuration utility, try
clearing your browser cache or try using your web browsers 'private browser' or incognito
mode.
The router's home page will open displaying its current connection status.
The bar at the top of the page has quick access to Settings and Management functions. You
may quickly jump back Home at any time.
Note: The system will automatically log out after a period of inactivity.
D-Link DIR-895L User Manual

Configuration - Router Mode

Admin Password:
Log In
Home Settings
DIR-895L HW:A1 FW:1.12
Internet Connected
Click on any item in the diagram for more information.
Internet DIR-895L
Internet
Cable Status: Connected MAC Address:
Connection Type: Dynamic IP (DHCP) IP Address:
Network Status: Connected Subnet Mask:
Connection Uptime: 1 Day 3 Hour 50 Min 58 Sec Default Gateway:
Primary DNS Server:
Release IP Address
Secondary DNS Server:
COPYRIGHT © 2016 D-Link
Features Management
Connected Clients: 1
USB Device
IPv4 / IPv6
FF:FF:FF:FF:FF:FF
172.17.5.120
255.255.255.0
172.17.5.1
172.17.5.5
172.17.5.6
Go to settings
35