Management; Time & Schedule; Time - D-Link DIR-895L User Manual

Section 4 - Configuration - Router Mode
The Time page allows you to configure, update, and maintain the correct time on the internal
system clock. From here you can set the time zone, the Network Time Protocol (NTP) server,
and enable or disable daylight saving time.
In the Management menu on the bar on the top of the page, click Time & Schedule.
Time Configuration
Time Zone:
Select your time zone from the drop-down menu.

Time:

Displays the current date and time of the router.
Daylight Saving:
Enable or disable daylight saving time.
Automatic Time Configuration
Update Time Enable or disable to allow an NTP server on the Internet to synchronize
Using an NTP the time and date with your router. If you enable this option, select
Server: an NTP server from the drop-down menu. To configure the router's
time and date manually, disable this option and use the drop-down
menus that appear to input the time and date.
Click Save when you are done.
To configure and manage your schedules, click Schedule and refer to Schedule on page
94.
D-Link DIR-895L User Manual

Management

Time & Schedule
Time
Home Settings
DIR-895L HW:A1 FW:1.12
Time
Your router's internal clock is used for data logging and schedules for features. The date and time can be
synchronized with a public time server on the Internet, or set manually.
Management >> System Time
Time Configuration
Time Zone: (GMT-05:00) Eastern Time (US & Canada)
Time: 2016/08/07 07:34:06 PM
Enable Daylight Saving: Disabled
Automatic Time Configuration
Update Time Using an NTP Server: Enabled
D-Link NTP Server
NTP Server:
COPYRIGHT © 2016 D-Link
Automatic Time Configuration
Update Time Using an NTP Server: Disabled
Manual Time Configuration
⌵
Date: 2016 08
⌵
Time: 10 28
Features Management
Schedule Save
⌵
⌵
D-Link NTP Server
⌵ ⌵
10 (Year/Month/Day)
⌵
(Hour/Minute)
93