Vantrue Nexus 4 Pro User Manual page 28

Motion Detection
When the motion detection is turned on, the
will be displayed on the recording interface, indicating
that the dash cam is currently in motion detection
mode. You can go to "Motion Detection Area" in the
menu settings to set the detection area.
2160P+1080P+1080P 30FPS
00:00:37
When the motion Detection is turned on, and no
movement is detected after 3 minutes of recording,
then an
and the screen will turn off after 3 minutes.
2160P+1080P+1080P 30FPS
00:00:37
Note: Motion detection mode can only be engaged
when the camera is turned on. Once the camera is
turned off, the motion detection mode will not work.
Low Bitrate Recording
When Low Bitrate recording is enabled, the icons
will be displayed in the upper right corner of the
screen, depending on whether you choose 1080P
15FPS or 720P 15FPS.
2160P+1080P+1080P 30FPS
00:00:37
14:25:35 06-01-2023
icon will appear in the center of the screen,
14:25:35 06-01-2023
14:25:35 06-01-2023
- 25 -
icon
F
35
MP/H
F
35
MP/H
F
35
MP/H
or