11 SERVICE WORK ON THE CHASSIS
11.8
52
S02314-10
Installing the fork legs
H01182-10
S02314-11
S02315-11
https://www.motorcycle-manual.com/
–
3
Loosen screws
. Take out the left fork leg.
–
4
Loosen screws
. Take out the right fork leg.
Main work
–
Position the fork legs.
1
Air release screw
the front.
A
Valve
of the left fork leg faces the front.
Info
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the top)
must be flush with the top edge of the upper triple
clamp.
The air suspension is located in the left fork leg. The
pressure and rebound damping is located in the right
fork leg.
–
2
Tighten screws
.
Guideline
Screw, top triple
clamp
–
3
Tighten screws
.
Guideline
Screw, bottom triple
clamp
–
Position the brake caliper. Mount and tighten screws
Guideline
Screw, front
M8
brake caliper
–
Position the brake line and clamp. Mount and tighten
5
screws
.
Finishing work
–
Install the front wheel.
of the right fork leg is positioned to
M8
17 Nm (12.5 lbf ft)
M8
12 Nm (8.9 lbf ft)
25 Nm (18.4 lbf ft)
Loctite
(
p. 100)
4
.
®
243™