14.2
Installing the battery
14.3
Recharging the battery
Warning
Risk of injury Batteries contain harmful substances.
–
Keep batteries out of the reach of children.
–
Keep sparks and open flames away from the batteries.
–
Only charge batteries in well-ventilated rooms.
–
Maintain a minimum clearance from inflammable materials when charging batteries.
Minimum clearance
–
Do not charge deeply discharged batteries if charge is already below the minimum voltage.
Minimum voltage before the start of the charge
–
Dispose of batteries with less than the minimum voltage correctly.
Note
Environmental hazard Batteries contain environmentally-hazardous materials.
–
Do not dispose of batteries as household waste.
–
Dispose of batteries at a collection point for used batteries.
Main work
–
Position the battery in the battery compartment with the ter-
minals facing forward, and secure with holding bracket
Battery (HJTZ5S-FP-C) (
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
Info
Contact disks
and cable sockets
tery terminal.
–
Connect positive cable
Guideline
Screw, battery termi-
nal
H02650-10
–
Slide positive terminal cover
–
Connect negative cable
Guideline
Screw, battery termi-
nal
–
Position the voltage regulator.
Finishing work
–
Mount the seat. (
–
Install the air filter box cover. (
1 m (3 ft)
9 V
https://www.motorcycle-manual.com/
ELECTRICAL SYSTEM 14
p. 139)
2
.
M6
10 Nm (7.4 lbf ft)
A
must be mounted under screws
4
with the claws toward the bat-
5
to the battery.
M5
2.5 Nm (1.84 lbf ft)
6
over the positive terminal.
7
to the battery.
M5
2.5 Nm (1.84 lbf ft)
p. 63)
p. 64)
1
.
3
107