Husqvarna FC 450 2019 Owner's Manual page 131

–
Push back the protection caps of the handlebar controls to
allow any water that has penetrated to evaporate.
–
After the motorcycle has cooled off, lubricate all moving parts
and bearings.
–
Clean the chain. (
–
Treat bare metal (except for brake discs and the exhaust sys-
tem) with a corrosion inhibitor.
Preserving materials for paints, metal and rubber
( p. 148)
–
Treat all plastic parts and powder-coated parts with a mild
cleaning and care product.
Special cleaner for glossy and matte paint finishes, metal
and plastic surfaces (
https://www.motorcycle-manual.com/
CLEANING, CARE 18
p. 74)
p. 148)
129