Table of Contents
Advertisement
Add or Edit Full Function Entry Code:
When adding a full Function Entry Code, it will default to "Active" at the current date and time
with no deactivation date. To deactivate a code, or to activate or deactivate on a specific time
and date, see Activate or Deactivate Entry Code on page 38.
Press
1
Enter Entry Code (3-9 digits). Then (#)
2
Schedule for Door 1 (0 to 63). Then (#)
3
0=Full Restrictions 1=Full Access
Schedule for Door 2 (0 to 63). Then (#)
4
0=Full Restrictions 1=Full Access
Example:
1
Enables entry code "5400" to activate doors 1 & 2 on schedule #2 and restricts access to doors 3 & 4.
Change Entry Code ONLY:
Change only the Entry Code without affecting the other data associated with the code (e.g.,
schedule, door assignment, etc.). For example, you change only the code and keep the
resident's existing schedule and door assignment because unauthorized individuals have been
using that resident's code.
Press
1
The Current Entry Code Number (3-9). Then (#)
2
The New Entry Code Number (3-9). Then (#)
3
Example:
1
Delete an Entry Code:
Press
1
Enter the Entry Code number to be deleted (3-9 digits). Then (#)
2
Change Entry Code Door Access:
Change which doors or single door an entry code activates. By default new entry codes can
open any door, use this step to have the code open a specific door.
Press
1
Enter the Entry Code number (3-9 digits). Then (#)
2
Enter 0 for access at any door. Enter 1,2,3 or 4 for specific door access.
3
If you make an error during an entry, press the asterisk key (*) to begin again.
Schedule for Door 3 (0 to 63). Then (#)
5
Then
0=Full Restrictions 1=Full Access
Schedule for Door 4 (0 to 63). Then (#)
6
0=Full Restrictions 1=Full Access
Factory Settings: All Doors = 1 Full Access
2
54
Then
2
Changes entry code from "6543" to "3456".
57
Then
75
Then
Page 36
51
Door 1
Door 2
Door 3
3
4
5
Door 4
6
3
Advertisement
Table of Contents
