Suppressing Stereo Signal; Recording To The Usb Drive; An Overview - RCA RS2060i User Manual

RS2060i EN 4/10/06
Using Presets
• When in PRESET mode, press
access the previous or next preset station.

Suppressing Stereo Signal

Press FM ST to toggle between FM mono and
stereo mode. (Remote Only) "STEREO" is
displayed in stereo mode.

Recording to the USB drive

An Overview

• You can record CD, Tuner or AUX files to any
MSC devices connected to the USB Jack.
• Recording function always records what is
being played. Press SOURCE to select the
source you want to record from.
• In general, recording starts instantly RECORD
is pressed. It stops when STOP is pressed.
• During recording, "Record" displays.
• There is one exception where recording will
not start immediately when RECORD is pressed
while in CD mode and the CD is NOT
Playing. In this case, the unit goes into
Recording Standby Mode, which is indicated by
the flashing recording icon. This is to avoid
recording in "silence" to the USB device.
• The unit will go from Recording Standby Mode
to Recording Mode as soon as the CD starts
playing.
• When recording CD, there are 2 options:
"Normal", which records the CD in real time as
it plays; or "High Speed", which records the CD
at roughly double the normal speed.
• There are two situations during recording:
• Situation A: Recording any passage from
a CD. Play the CD, press RECORD when you
want to start recording, and press RECORD
again when you want to stop recording. You
can start whenever you want.
• Situation B: Recording a track from the
CD. In CD stop mode. Press RECORD and
select either Normal or High Speed recording.
The unit will remain in Recording Standby
Mode. Then select and play the track.
Recording will start synchronizing
5:49 PM Page 17
or to
Tips: Under PRESET mode, press
or can only access the preset
stations. Manual tuning is not available in
this mode.
automatically with the start of the CD
playback.
Recording CD to USB drive
Recording on Standby and Selecting
Recording Speed
1. Connect the USB drive to the unit's USB Jack at
the top of the unit.
2. In CD stop mode, press RECORD.
3. Turn VOLUME CONTROL knob or press
, or to select Normal or High
Speed.
Rec. Speed
Normal
High
4. Press SELECT to confirm selection. The unit will
enter recording standby mode. This is indicated
by the RECORD icon flashing on the display.
5. Press to start playback and recording
will begin and the RECORD icon displays.
6. Press TUNE/PRESET to stop recording.
Examples
Record one CD
Repeat steps 1 to 4 under "Recording
Standby/Selecting Recording Speed" on this
page. Press DISC 1 to DISC 5 to start recording
the corresponding disc.
Record all 5 CDs
Repeat steps 1 to 4 under "Recording
Standby/Selecting Recording Speed" on this
page. Press to start recording. Ensure "All
Disc" mode is selected.
EN
,
11