Settings; Setting The Clock/Timer; Sleep Mode - RCA RS2060i User Manual

RS2060i EN 4/10/06

Settings

Setting the Clock
1. Press and hold CLOCK on the remote control
until the hour flashes on the display.
2. Press or
press CLOCK to shift to minute digits.
3. Press or
4. Press CLOCK to save settings. Or press
TUNE/PRESET to cancel the setting.
Timer and Program Recording
You can turn on/off the unit or record TUNER at
preset times by setting the timer.
You can use Program Recording to preset the unit
to record your favorite radio program. When
setting the timer, choose TUNER REC as the
source to record radio at the preset time. Ensure
there is adequate memory, when the mp3 player
is connected.
Setting the Timer
1. Press and hold TIMER on the remote control
until Timer On and the clock hour flashes on
the display.
2. For time setting, press
hour and then press TIMER to shift to minute
digits.
3. Press or
4. Press TIMER to change to Timer Off setting
with clock time flashing. Repeat steps 2 & 3 for
timer off time setting.
5. Press TIMER to select source. Press
to select TUNER/TUNER REC/DISC/USB/iPod.
If TUNER REC is selected, press
select the preset station.
6. Press TIMER to set volume. Adjust VOLUME
CONTROL to select desired volume level.
7. Press TIMER to save settings.
Press TUNE/PRESET to cancel setting.
The timer is automatically activated once timer
setting is saved.
5:49 PM Page 13
to set the hour and then
to set the minute.
or to set the
to set the minute.
or
or to
Activating the Timer
Press TIMER to turn on/off the alarm. The timer
icon is displayed when timer is activated.

Sleep Mode

You can select the time interval in minutes before
the unit turns off automatically.
Press SLEEP to select among OFF, 120, 90, 60, 45,
30, 15 and 5 minutes.
The SLEEP icon lights on the display when sleep
mode is activated.
View and Adjust Remaining Sleep Time
When sleep is activated, press SLEEP once to
view remaining sleep time. Press again to change
the time.
Note: Sleep is automatically de-activated
when the unit is turned off.
Showing Demonstration
Press DEMO to turn on/off demonstration mode.
EN
7