Table of Contents
Advertisement
RS2060i EN
4/10/06
USB Playback
Connecting USB drive to the Main Unit
Insert the USB drive's connector into the main
EN
unit's USB Jack, on top of the unit. To disconnect,
unplug the drive.
Selecting USB Mode
Press SOURCE repeatedly to select USB mode.
USB Playback Features
Start and Pause Playback
Press
to start and pause playback.
Radio
Selecting Tuner Mode
Press SOURCE to enter Tuner mode.
Selecting Tuner Band
In Tuner mode, press BAND to select between FM
or AM Radio band.
Tune Mode and Preset Mode
The tuner can be in either TUNE or PRESET
mode.
• To select between TUNE and PRESET mode,
press
TUNE/PRESET.
• In PRESET mode, "P XX" will be displayed
where "XX" represents the preset number (1-
32).
Tune Mode
In TUNE mode, you can press
select desired frequencies.
• Press
or
• Press and hold
frequencies.
Preset Mode
In PRESET mode, the unit can store up to 32
radio stations in its memory. You can program the
presets in two ways:
• Manually setting the by entering every single
10
5:49 PM
Page 16
or
to
to select frequencies.
or
to scan
Stop Playback
Press
to stop playback. The unit enters the
navigation mode for 10 seconds before entering
th stop mode.
Fast Forwarding/Reversing/Skipping Files
• Press and hold
or
or reverse through a file while it is playing.
• Press
or
to skip to the previous
or next file.
Memory Usage
Press BAND/INFO on the main unit or INFO on
the remote control to view memory usage on the
USB drive.
radio station yourself.
• Perform Auto Preset Programming and the
unit can store all available radio stations
automatically in ascending order.
Manually Setting Presets
1. Press
TUNE/PRESET to enter TUNE mode.
2. Press
or
to adjust the desired
frequency.
3. Press PROG once and the most recently
accessed program location flashes on the
display.
4. If a different program location is preferred,
press
or
to move to the desired
preset number (1-32).
5. Press PROG to store the selected frequency at
that preset.
Auto Preset Programming (FM only)
Press and hold the BAND button for 2 seconds to
scan stations in the FM band. The stations will
then be stored as preset channels. A maximum of
32 stations can be stored. Be careful of your
preset channels being erased accidentally because
the scanning and storing process is automatic
upon pressing the button. You can stop the
automatic scan by pressing any button, but the
erased stations cannot be recovered.
to fast forward
Advertisement
Table of Contents
