Table of Contents
Advertisement
I. PressSOURCE to select TUNER.
2. PressBAND to select between AM or FM radio
band,
Tip: Youraudiosystem has 32 preset stations.
Tuning to a Station
PressSKIP FORWARD_r,I__/BACKWARD
_
to select frequencies.
Using Presets
The tuner can be in either
TUNE or PRESET mode.
When in PRESET mode, the PROGlight is on.
Press SKIP BACKWARD _
_
or SKIP FOR-
WARD _
_
on tbe main system or PRESETUP or
DOWN on the remote control to accessthe previous
or next preset station. The display first showsthe pre-
set program number and after a few seconds, t he fre-
quency and preset program number wi[I be displayed.
(FMPR:Ol is FM preset 1)
Setting Presets
1, PressTUNE/PRESETbutton to enter TUNER mode,
2, PressSKIP FORWARD _
_
I BACKWARD
_
to accessthe desired frequency.
3. Pressthe PROG/SETbutton once.
4. The most recently accessedprogram location will
be displayed.
5. If a different program location ispreferred, press
SKIP BACKWARD _
_
I FORWARD_
_
to
move to the desired preset number (1132).
6, PressPROG/SETto store the selected frequency at
that
preset.
Suppressing Stereo Signal
PressFM ST to toggle between FM mono and stereo
for stereo FM stations. (Remote Only)
Auto Preset
Programming
(for FM only)
ita Ill!
Pressand hold BAND
button for 2 secondsto scan stations in PM band. The
stations will then be stored as preset channels. A maxi-
mum 32 stations can be stored. Beware of your preset
channels being erased accidentally becausethe scan-
ning and storing process is automatic upon pressing
the button. You can stop the automatic scan by press-
ing any button, but the erased stations cannot be
recovered.
Advertisement
Table of Contents
