Tuning To A Station; Using Presets; Auto Preset Program (For Fm Only); Setting Presets - RCA RS2531 User Manual

RS2531-EN 3/6/01 2:51 PM Page 12
1. PressSOURCEto select TUNER.
2. PressBAND to select between AM or FM radio
band,
Tip: Your audio s ystem has32preset staticss.
Setting Presets
1. PressSKIP FORWARD/BACKWARD to accessthe
desired frequency.
2. Pressthe SET button once.
3. The most recently accessedprogram location will
be displayed.
4. If a different program location is preferred, press
SKIP BACKWARD I FORWARD to move to the
desired preset number (1-32).
5. PressSET to store the selected frequency at that
preset.
Tuning to a Station
Press SKIP FORWARD/BACKWARD to select fre-
quencies.
Suppressing Stereo Signal
PressFM ST to toggle between FM mono and stereo
for stereo FM stations. (Remote Only)
Using Presets
The tuner can be either
TUNE or PRESET mode,
When in PRESET mode, the PROGlight is on.
Press SKiP BACKWARD or SKiP FORWARD on the
main system or PRESETUP or DOWN on the remote
control to accessthe previous or next preset station,
The display first shows the preset program number
and after a few seconds, the frequency and preset
program number will be displayed, (FMPR:01 is FM
preset 1)
Auto Preset
Programming
(for FM only)
Pressand hold BAND
button for 2 second to scan stations in the selected
band. The stations will then be stored aspreset chan-
nels. A Maximum 32 stations can be stored. Beware of
your preset channels being erased accidentally
becausethe scanning and storing process is automatic
upon pressing the button.
You can stop the automatic scan by pressing any but-
ton, but the erased stations cannot be recovered.
"°.... .............................................................................................................................................................................. .°,*"
_8