Display Settings; Showing The Demonstration; Setting Clock / Timer; Setting The Timer - RCA RS2605 Instruction Book

RS2605 EN 6/13/02 9:30 AM

Display Settings

SURROUND
PROG
INTRO
FM
ST
PLAYLIST
FILE ARTIST
FOLDER ALBUM
BASS BOOST GENRE

Showing the Demonstration

Not operational in CD mode. Press DIMMER/DEMO
to turn on/off demonstration mode. The demonstra-
tion scrolls through all display operations.

Setting Clock / Timer

Setting the Clock

1. Press and hold CLOCK until the hour flashes on
the display.
2. Press SKIP BACKWARD
WARD on the main unit or PRESET / PREV
or PRESET / NEXT
to select the hour.
3. Press CLOCK to shift to minute digits.
4. Follow step 2 to set the minute digits.
5. Press PROG./SET to confirm and save settings.
Press STOP to quit setting.
Note: When system is ON, you can press CLOCK
to display the current time for about 2 seconds.

Setting the Timer

1. Press and hold TIMER until AM 12:00 ON
appears with the hour flashing (ON - timer on time)
2. Press SKIP BACKWARD
FORWARD on the main unit or PRESET /
PREV or PRESET / NEXT
control to select the hour.
3. Press TIMER to shift to minute digits.
4. Repeat step 2 to select minute digits.
5. Press TIMER to shift to timer off time setting.
6. AM 12:00 OF(timer off time) will show on the
display with hour flashing. Repeat steps 2 - 4 for
timer off time setting.
7. Press TIMER to select source. Press SKIP BACK-
WARD / SKIP FORWARD
main unit or PRESET / PREV
on the remote control to select between CD
/TUNER / TAPE)
8. Press TIMER to set volume.
Page 9
DISC
1 TAPE 2 SLEEP
TIMER REPEAT 1 ALL DISC
9. Rotate the VOLUME knob on the main unit or
press VOL + or VOL - on the remote control to set
desired volume level.
10. Press PROG./SET to confirm and save settings.
Press STOP to quit setting.

Activating the Timer

Press and release TIMER to activate and deactivate
the timer. TIMER will lit when the alarm is active.
or SKIP FOR-
Adjusting the Display Brightness
on the remote control 1. Press and hold DIMMER/DEMO for more than 2
seconds.
2. While the DIMMER is displayed, press and release
DIMMER/DEMO to select the desired display
brightness level (DIMMER 0 - 3).

Sleep Mode

You can select the time interval in minutes before
the unit turns off automatically. Press SLEEP on the
remote to select among 120, 90, 60, 45, 30, 15, 5
minutes and OFF. (Remote Only)
or SKIP
on the remote
on the
or PRESET / NEXT
EN
MIX MIX
SHUFFLE
6