Settings; Showing The Demonstration; Display Clock / Timer; Setting The Clock - RCA RS2300 User Manual

Settings

Showing the Demonstration

EN
Press DEMO to turn on/off demonstration mode.
The demonstration scrolls through all display
operations.

Display Clock / Timer

Setting the Clock

1. Press and hold CLOCK to enter clock setting
mode. The hour flashes on the display.
2. Press SKIP BACKWARD
on the main unit or PRESET
on the remote control to set the hour .
Press CLOCK to shift to minute digits.
3. Press SKIP BACKWARD
on the main unit or PRESET
on the remote control to set the minute .
4. Press PROG/SET to save settings.
Press STOP to quit settings.
Note:
• When system is ON, you can press CLOCK to
display the current time for about 2 seconds.

Setting the Timer

1. Press and hold TIMER until the ON and clock
hour flashes on the display ( ON - timer on time ).
2. For setting time, press SKIP BACKWARD
SKIP FORWARD
or PRESET
the hour and then press TIMER to shift to minute
digits.
3. Press SKIP BACKWARD
on the main unit or PRESET
on the remote control to set the minute.
4. Press TIMER to change to OF (timer off time)
with clock time flashing. Repeat steps 2 & 3 for
timer off time setting.
6
or SKIP FORWARD
or PRESET
or SKIP FORWARD
or PRESET
on the main unit or PRESET
on the remote control to set
or SKIP FORWARD
or PRESET
5. Press TIMER to select source. Press SKIP
BACKWARD
main unit or PRESET
remote control to select between CD / TUNER /
TAPE / REC TU .
6. Press TIMER to set volume. Rotate the VOLUME
control to select desired volume level.
7. Press PROG/SET to save settings.
Press STOP
The timer is automatically activated once timer
setting is saved.

Activating the Timer

Press and release TIMER to turn on/off the alarm.
The timer is active when the clock icon

Sleep Mode

You can select the time interval in minutes before
the unit turn off automatically. Press SLEEP to select
among OFF, 120, 90, 60, 45, 30, 15 and 5 minutes.
or
or SKIP FORWARD
or PRESET on the
to quit setting.
on the
is lit.