Display Settings; Display; Showing Demonstration; Display Clock / Timer - RCA RS2635 User Manual

RS2635_40-EN 23_12

Display Settings

Display

Showing Demonstration

Not operational in CD mode. Press DIMMER•DEMO /
CD INFO (RS2635) or DIMMER/DEMO (RS2640) to
turn on/off demonstration mode. The demonstration
scrolls through all display operations.

Display Clock / Timer

Setting the Clock

1. Press and hold CLOCK until the hour flashes on
the display.
2. Press DIGITAL TUNING
hour and then press CLOCK to shift to minute
digits.
3. Press DIGITAL TUNING
minute.
4. Press PROG•SET to save settings and STOP
quit setting.
Note: When system is ON, you can press CLOCK to
display the current time for about 2 seconds.

Setting the Timer

1. Press and hold TIMER until the ON appear with
the hour flashing ( ON - timer on time )
2. For setting time, press DIGITAL TUNING
to set the hour and then press TIMER to shift
to minute digits.
3. Press DIGITAL TUNING
minute.
4. Press TIMER to change to OF (timer off time) with
hour flashing. Repeat steps 2 & 3 for timer off
time setting.
5. Press TIMER to select source. Press DIGITAL
TUNING or
12/23/03 2:23 PM
or to set the
or to set the
to
or
or to set the
to select TUNER, TAPE or CD.
Page 9
BASS
SURROUND
6. Press TIMER to set volume. Press VOLUME
CONTROL up or down to set desired volume level.
7. Press PROG•SET to save settings or STOP to quit
setting.

Activating the Timer

Press and release TIMER to turn on/off the timer. The
timer is active when the clock icon

Adjusting the Display Brightness

1. Press and hold DIMMER•DEMO / CD INFO
(RS2635) or
DIMMER/DEMO
(RS2640) for more than
2 seconds.
2. While the dimmer is displayed, press and
release DIMMER•DEMO / CD INFO (RS2635) or
DIMMER/DEMO (RS2640) repeatedly to select the
desired level (DIMM 1 - 3).

Sleep Mode

You can select the time interval in minutes before the
unit turns off automatically. Press SLEEP on the
remote to select among OFF, 90, 60, 45, 30, 15 and 5
minutes. (Remote Only)
The sleep icon flashes on the display when sleep
mode is activated.
When sleep is activated, press SLEEP once to view
remaining sleep time.
Press SLEEP again when the remaining sleep time is
displayed to change sleep time.
Note: Sleep is automatically de-activated when the
unit is turned off.
EN
is lit.
DIMM 2
5