Samsung VP-D455 Service Manual page 14

Alignment and Adjustments
5) How to set up the camera adjustment mode
[STEP 1]
ΠConnect the Power source.
´ Set the Power Switch to "CAM" position and Mode Switch to "TAPE" position.
[STEP 2]
ΠPress and hold the "STOP" and "PB ZOOM" buttons on the video camera at the same time for more than
5 seconds.
´ When monitor OSD appears as shown Fig. 3-5, the adjustment mode has been activated successfully.
ˇ Move the "MENU Selector" to highlight CAM ADJ and push the "MENU Selector".
¨ Monitor OSD shows Fig. 3-6.
Then Camera adjustment mode has been activated successfully.
[STEP 3]
In order to complete the adjustment the power must be reset.
This can be done by disconnecting and reconnecting the power source.
EASY Q Button
3-4
STOP Button
Mode switch
DISPLAY Button
PB ZOOM
Start/Stop Button
Power switch
Fig. 3-4
Fig. 3-5
MENU Button
MENU Selector
Samsung Electronics