Table of Contents
Advertisement
Maintaining and servicing your device
6.4 Spare parts and repairs
6.4
Spare parts and repairs
Risk of bodily injury or equipment damage due to unauthorized opening or repairing
Bodily injury or considerable equipment damage may result from the unauthorized opening
or repairing of the device. Do not carry out any repairs on your own. Repairs may only be
carried out by authorized qualified personnel at the manufacturer's site.
In case of repair, the device must be shipped to the Return Center in Erlangen. Only repair
by the Return Center in Erlangen is permitted.
Depending on the work necessary to repair the device, the Center may decide to give you a
credit. In this case, it is your responsibility to order a new device.
The address is:
Siemens AG
Digital Factory Retouren-Center
c/o Geis Service GmbH, Tor 1-4
Kraftwerkstraße 25a
91056 Erlangen
Germany
See also
Spare parts and repairs (http://support.automation.siemens.com/WW/view/en/16611927)
6.5
Recycling and disposal
Due to the low levels of pollutants in the HMI devices described in these operating
instructions, they can be recycled.
Contact a certified disposal service company for electronic scrap for environmentally sound
recycling and disposal of your old devices, and dispose of the device according to the
relevant regulations in your country.
86
WARNING
IFP, IFP PRO, IFP ETH
Operating Instructions, 09/2019, A5E31298376-AJ
Advertisement
Table of Contents
