Press conference audio distribution amplifier (9 pages)
Summary of Contents for AudioPressBox APB-116P
Page 1
APB-116P Press Conference Audio Distribution Amplifier Owner’s manual...
Page 2
TV Camera operators, audio recorders and reporters at the same time. No more hassle with the multiple microphones on the table or disturbing late-coming reporters. With AudioPressBox® you are set in a minute with providing the perfect signal to every reporter! APB-116 P Unpacking your AudioPressBox®...
Page 3
APB-116P - Front panel (Input section) Output level Gain + 12 3 dB 6 dB 12 dB 18 dB Phantom Clip - 24 - 48 Line Phones DC 24V 1A Charge Power 160 Hz 100% Battery Power Input Comp. Osc.
Page 4
19. Power supply connector 5. Input gain level knob If Comp switch is set to ON, you can visually monitor Plug the power supply to AudioPressBox® here. If After connecting your microphone, you can set the level of Gain reduction on this 4-segment...
Page 5
APB-116P - Rear panel (Output section) Balanced Isolated Outputs Line Line Line Line Line Line Line Line Line Line Line Line Line Line Line Line Balanced Isolated Outputs Audio Press Box APB-116P Mic Level -20dBu Line Level +6dBu 20. Mic/Line Outputs 1-16 21.
Page 6
Get your AudioPressBox® operational: 1. In case you are not running on rechargeable batteries, plug your power supply to the AudioPressBox® and plug it to mains. 2. Turn AudioPressBox® on (by switching Power switch (17) ON). 3. Plug your microphone into input XLR connector (1).
Need help?
Do you have a question about the APB-116P and is the answer not in the manual?
Questions and answers