1. Manuals
  2. Brands
  3. AXIOMTEK Manuals
  4. Media Player
  5. DSP302 Series
  6. User manual

AXIOMTEK DSP302 Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DSP302 Series
®
Digital Signage Player with Intel
®
Celeron
Processor N6210/J6413

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DSP302 Series and is the answer not in the manual?

Questions and answers

Related Manuals for AXIOMTEK DSP302 Series

Summary of Contents for AXIOMTEK DSP302 Series

  • Page 1 DSP302 Series ® Digital Signage Player with Intel ® Celeron Processor N6210/J6413...
  • Page 2 Axiomtek does not make any commitment to update any information in this manual. Axiomtek reserves the right to change or revise this document and/or product at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any forms or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permissions of Axiomtek Co., Ltd.

  • Page 3: Safety Precautions

    Safety Precautions Before getting started, please read the following important safety precautions. The DSP302 does not come with an operating system which must be loaded first before installation of any software into the computer. Be sure to ground yourself to prevent static charge when installing any internal components.

  • Page 4: Classifications

    Classifications Degree of production against electric shock: Not classified. Degree of protection against ingress of water: IP40 Equipment not suitable for use in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide. Mode of operation: Continuous...

  • Page 5: General Cleaning Tips

    General Cleaning Tips Please keep the following precautions in mind while understanding the details fully before and during any cleaning of the computer and any components within. A piece of dry cloth is ideal to clean the device. Be cautious of any tiny removable components when using a vacuum cleaner to absorb dirt on the floor.

  • Page 6: Scrap Computer Recycling

    Scrap Computer Recycling Please inform the nearest Axiomtek distributor as soon as possible for suitable solutions in case computers require maintenance or repair; or for recycling in case computers are out of order. Trademarks Acknowledgments Axiomtek is a trademark of Axiomtek Co., Ltd.

  • Page 7: Table Of Contents

    Table of Contents Disclaimers ..................... ii Safety Precautions ..................iii Classifications ....................iv General Cleaning Tips ................... v Scrap Computer Recycling ................vi Section 1 Introduction ..........1 General Descriptions ................1 System Specifications ................ 3 1.2.1 CPU ......................3 1.2.2 I/O System ....................
  • Page 8 Section 4 AMI BIOS Setup Utility ......25 Entering Setup ................... 25 Navigation Keys ................25 Main Menu ..................26 Advanced Menu ................. 27 Chipset Menu ..................36 Security Menu ..................37 Boot Menu ..................40 Save & Exit Menu ................41 Appendix A Watchdog Timer ........

  • Page 9: Introduction

    DSP302 Series User’s Manual Section 1 Introduction This section contains general information and detailed specifications of the DSP302. Section 1 consists of the following sub-sections: ◼ General Descriptions ◼ System Specifications ◼ Dimensions ◼ I/O Outlets ◼ Packing List General Descriptions The DSP302 is a fanless digital signage player that comes with an Intel ®...
  • Page 10 DSP302 Series User’s Manual ⚫ Features Intel ® Celeron ® processor N6210/J6413 4GB LPDDR4 memory onboard (8GB option) 4 USB 3.2 Gen 2, 1GbE LANs 3 x HDMI 2.0 for 4K UHD content (CPU: J6413) 2 x HDMI 2.0 for 4K UHD content (CPU: N6210) 1 x M.2 Key M support SATA/PCIE x2 signal...

  • Page 11: System Specifications

    DSP302 Series User’s Manual System Specifications 1.2.1 ⚫ ® ® ® ® ◼ Intel Celeron N6210 processor, Intel Celeron J6413 processor. ⚫ Chipset ◼ SoC integrated. ⚫ BIOS ◼ American Megatrends Inc. UEFI (Unified Extensible Firmware Interface) BIOS. (Elkhart Lake can not suppor Legacy mode under BIOS.) ⚫...

  • Page 12: System Specification

    DSP302 Series User’s Manual 1.2.3 System Specification ⚫ Watchdog Timer ◼ 1~255 seconds or minutes; up to 255 levels. ⚫ Power Supply ◼ 12VDC /36W AC to DC adapter. ⚫ Operation Temperature ◼ 0°C ~ +45°C (32°F ~ 113°F). ⚫...

  • Page 13: Dimensions

    DSP302 Series User’s Manual Dimensions The following diagrams show dimensions and outlines of the DSP302. 1.3.1 System Dimensions Introduction...

  • Page 14: Optional Wall-Mount Bracket Dimensions

    DSP302 Series User’s Manual 1.3.2 Optional Wall-mount Bracket Dimensions Instruction Step 1: Screw the two pieces of wall-mount (721000044900 DSP302 WALL MOUNT) kits to the bottom plate of the device. Total four screws (metric 3x6) are required. Step 2: Use the device, with wall mount plate attached, as a guide to mark the correct locations of the four screws.

  • Page 15: I/O Outlets

    DSP302 Series User’s Manual I/O Outlets The following figures show I/O outlets on the DSP302. Front View Rear View Introduction...

  • Page 16: Packing List

    DSP302 Series User’s Manual Packing List The DSP302 comes with the following bundle package: ⚫ DSP302 System Unit x1 DSP302 I/O mylar x 2 643000003400 Mylar Front 2HDMI version 643000003500 Mylar Front 3HDMI version 643000003600 Mylar Rear ⚫ AC 36W (12V/3A) Adaptor x1 ⚫...

  • Page 17: Hardware Installation

    DSP302 Series User’s Manual Section 2 Hardware Installation The DSP302 is convenient for various hardware configurations such as, M.2 Device and Mini PCIe modules. Section 2 contains guidelines for hardware installation. Installation of M.2 Device Step 1 Turn off the system and unplug the power cord.
  • Page 18 DSP302 Series User’s Manual Step 3 Open the TOP cover. Step 4 Located the M.2 socket on main board. Step 5 Locate the M.2 slot and insert a M.2 module into the socket and then tighten the screw. Hardware Installation...

  • Page 19: Installation Of Mini Pcie Module

    DSP302 Series User’s Manual Step 6 Put the TOP cover and tighten four screws back onto the system. Installation of Mini PCIe Module Step 1 Turn off the system and unplug the power cord. Step 2 Turn the system upside down to locate screws at the bottom and back then loosen all screw.
  • Page 20 DSP302 Series User’s Manual Step 3 Open the TOP cover. Step 4 Locate the M.2 socket on main board. Step 5 Locate the Mini PCIe slot and insert a Mini PCIe module into the socket and then fasten a screw.

  • Page 21: Installation Of Sim Card

    DSP302 Series User’s Manual Step 6 Put the TOP cover and fasten four screws back onto the system. Installation of SIM Card Step 1 Turn off the system and unplug the power cord. Step 2 Turn the system upside down to locate screws at the bottom and back then loosen all screws.
  • Page 22 DSP302 Series User’s Manual Step 3 Open the TOP cover. Step 4 Locate the SIM Card socket on main board. Step 5 Identify the SIM Card slot, insert a SIM Card device into the socket and then fasten a screw.
  • Page 23 DSP302 Series User’s Manual Step 6 Put the TOP cover and fasten all screws back onto the system. Hardware Installation...
  • Page 24 DSP302 Series User’s Manual This page is intentionally left blank. Hardware Installation...

  • Page 25: Switch And Connector Settings

    Locations of Switch and Connectors PSB513 Top View It is strongly recommended that any unmentioned jumper settings should not be modified without instructions by Axiomtek FAEs. Any Note modifications without instructions might cause system failure Switch and Connector Settings...

  • Page 26: Summary Of Switch Settings

    DSP302 Series User’s Manual Summary of Switch Settings Proper switch setting configures the DSP302 to meet various application purposes. A table of default setting is listed below. Switch Description Setting Restore BIOS optimal defaults Release Default: Normal operation 3.2.1 Restore BIOS Optimal Defaults (SW1) Use SW1 to restore CMOS.

  • Page 27: Connectors

    DSP302 Series User’s Manual Connectors Signals go to the other parts of the system through connectors. Loose or improper connection might cause problems. Please make sure all connectors are properly and firmly connected. Here is a table summarizing the connectors on the hardware.

  • Page 28: Hdmi Connectors (Cn1~Cn3)

    DSP302 Series User’s Manual 3.3.1 HDMI Connectors (CN1~CN3) The HDMI (High-Definition Multimedia Interface) is a compact digital interface which is capable of transmitting high-definition video and high-resolution audio over a single cable. Signal Signal HDMI OUT_DATA2+ HDMI OUT_DATA2- HDMI OUT_DATA1+...

  • Page 29: Key M Connector (Cn5)

    DSP302 Series User’s Manual 3.3.3 M.2 Key M Connector (CN5) This system has one M.2 Key M socket for inserting M.2 2242 SATA & NVMe PCIE X2 SSD module. PCH will automatically detect SATA/NVMe (since they share the same pinout) without the need for BIOS configuration.

  • Page 30: Sim Card Slot (Cn6)

    DSP302 Series User’s Manual 3.3.4 SIM Card Slot (CN6) 1 x External SIM Card slot (for PCI-Express Mini Card socket) ⚫ ⚫ 2 x Antenna holes Signal SIM_PWR SIM_RESET SIM_CLK SIM_VPP SIM_DATA 3.3.5 Full-size PCI-Express Mini Card Connector (CN7) This is a full-size PCI-Express Mini Card connector complying with PCI-Express Mini Card Spec.

  • Page 31: Usb 3.2 Gen2 Type A Ports (Cn9 And Cn10)

    DSP302 Series User’s Manual 3.3.6 USB 3.2 Gen2 Type A Ports (CN9 and CN10) The board comes with one Universal Serial Bus (compliant with USB 3.2 Gen 2 (10Gb/s)) ports on the rear I/O for installing USB peripherals such as keyboard, mouse, scanner, etc.

  • Page 32: Cmos Battery Connector (Bat1)

    DSP302 Series User’s Manual 3.3.9 CMOS Battery Connector (BAT1) This is a connector for CMOS battery interface. Signal BAT1 (+3.3V level) 3.3.10 Power On/Off Button (CN13) It allows users to control PSB513 power on/off. Function Description Turn on/off system Keep system status...

  • Page 33: Ami Bios Setup Utility

    DSP302 Series User’s Manual Section 4 AMI BIOS Setup Utility This section provides users with detailed descriptions in term of how to set up basic system configuration through the BIOS setup utility. Entering Setup To enter the setup screens, follow the steps below: Turn on the computer and press <Del>...

  • Page 34: Main Menu

    DSP302 Series User’s Manual Main Menu When you first enter the setup utility, you will enter the Main setup screen. You can always return to the Main setup screen by selecting the Main tab. System Time/Date can be set up as described below.

  • Page 35: Advanced Menu

    DSP302 Series User’s Manual Advanced Menu This Advanced section allows users to configure and improve the system, or to set up some system features according to preference. You can select any of the items in the left frame of the screen to go to the sub menus: ►...
  • Page 36 DSP302 Series User’s Manual NCT5525D Super IO Configuration ⚫ You can use this screen to select options for the Super IO Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen.
  • Page 37 DSP302 Series User’s Manual ⚫ Hardware Monitor This screen displays the temperature of system and CPU, as well as system voltages (+5V and VBAT). AMI BIOS Setup Utility...
  • Page 38 DSP302 Series User’s Manual ⚫ Trusted Computing In terms of Trusted Platform Module Device, users can choose between disabling TPM and enabling Platform Trust Technology. TPM Device Selection Select TPM device: PTT: Intel ® built-in TPM. dTPM: External extended Infineon’s TPM (optional).
  • Page 39 DSP302 Series User’s Manual ⚫ CPU Configuration This screen shows CPU information, and you can change the value of the selected option. Intel (VMX) Virtualization Technology Enable or disable Intel Virtualization Technology. When enabled, a VMM (Virtual Machine Mode) can utilize the additional hardware capabilities. It allows a platform to run multiple operating systems and applications independently, hence enabling a single computer system to work as several virtual systems.
  • Page 40 DSP302 Series User’s Manual Turbo Mode When set default of Intel® Speed Shift Technology to Enabled, the setup item “Turbo Mode” will be shown in BIOS setup. Enable or disable processor Turbo Mode. The processor can be up to maximum turbo frequency when the workload of system becomes higher.
  • Page 41 DSP302 Series User’s Manual ⚫ Storage Configuration This screen specifies eMMC storage information. For items marked with “▶”, please press <Enter> for more options. AMI BIOS Setup Utility...
  • Page 42 DSP302 Series User’s Manual AMI BIOS Setup Utility...
  • Page 43 DSP302 Series User’s Manual ⚫ USB Configuration This screen specifies USB settings. AMI BIOS Setup Utility...

  • Page 44: Chipset Menu

    DSP302 Series User’s Manual Chipset Menu The Chipset menu allows users to change the advanced chipset settings. AMI BIOS Setup Utility...

  • Page 45: Security Menu

    DSP302 Series User’s Manual Security Menu The Security menu allows users to change the security settings for the system. Administrator Password This item indicates whether an administrator password has been set (installed or uninstalled). User Password This item indicates whether a user password has been set (installed or uninstalled).
  • Page 46 DSP302 Series User’s Manual ⚫ Secure Boot Secure Boot Secure Boot feature is Active if Secure Boot is Enabled, Platform Key (PK) is enrolled and the System is in User mode. The mode change requires platform reset. Secure Boot ensures that the system only boots from trusted software, preventing malicious software from loading and compromising the device.
  • Page 47 DSP302 Series User’s Manual The Factory Key Provision The Factory Key Provision ensures that the device has secure access to encrypted resources, such as data storage or communication. The keys are often unique to each device and can be used to secure firmware updates, secure boot processes, and to encrypt data at rest. The factory key provisioning process is an important step in securing devices and maintaining the confidentiality of sensitive information.

  • Page 48: Boot Menu

    DSP302 Series User’s Manual Boot Menu The Boot menu allows users to change boot options of the system. ⚫ Setup Prompt Timeout Setup Prompt Timeout is to delay the BIOS post before entering the operating system for a period of seconds according to user’s setting.

  • Page 49: Save & Exit Menu

    DSP302 Series User’s Manual Save & Exit Menu The Save & Exit menu allows users to load your system configuration with optimal or fail-safe default values. ⚫ Save Changes and Exit When you have completed the system configuration changes, select this option to leave Setup and return to Main Menu.
  • Page 50 DSP302 Series User’s Manual ⚫ Discard Changes Select this option to quit Setup without making any permanent changes to the system configuration. Select Discard Changes from the Save & Exit menu and press <Enter>. Select Yes to discard changes. ⚫...

  • Page 51: Appendix A Watchdog Timer

    DSP302 Series User’s Manual Appendix A Watchdog Timer About Watchdog Timer Software stability is major issue in most applications. Some embedded systems are not watched by human for 24 hours. It is usually too slow to wait for someone to reboot when computer hangs.

  • Page 52: Sample Program

    DSP302 Series User’s Manual Sample Program #include <pc.h> #include <stdio.h> #define SIO_Index_Port 0x2E #define SIO_Data_Port 0x2F #define SIO_Enter_Configuration_Mode 0x01 #define SIO_Entry_key 0x87 #define SIO_LDN_SEL_REGISTER 0x07 #define SIO_LogicalDevice_WDT 0x08 #define SIO_LogicalDevice_EnableOffset 0x30 #define SIO_LogicalDevice_Enable 0x01 #define SIO_LogicalDevice_Disable 0x00 #define SIO_Offset_Countdown_Type 0xF0...
  • Page 53 DSP302 Series User’s Manual // Select count type for minute type or second type to execute WDT timer // by below method. outportw(SIO_Index_Port,SIO_Offset_Countdown_Type); if(CountdownType == 1) outportw(SIO_Data_Port,SIO_Countdown_Type_Second); else if(CountdownType == 2) outportw(SIO_Data_Port,SIO_Countdown_Type_Minute); //Set Timer outportw(SIO_Index_Port,SIO_Offset_Countdown_Timer); outportw(SIO_Data_Port,WDTtimer); // Exit Configuration Mode outportw(SIO_Index_Port,SIO_Exit_Configuration_Mode);...

Table of Contents