1. Manuals
  2. Brands
  3. AXIOMTEK Manuals
  4. Media Player
  5. DSB320-842 Series
  6. User manual

AXIOMTEK DSB320-842 Series User Manual

Digital signage media player
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DSB320-842 Series
Digital Signage Media Player
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DSB320-842 Series and is the answer not in the manual?

Questions and answers

Related Manuals for AXIOMTEK DSB320-842 Series

Summary of Contents for AXIOMTEK DSB320-842 Series

  • Page 1 DSB320-842 Series Digital Signage Media Player User’s Manual...
  • Page 2 Axiomtek does not make any commitment to update the information in this manual. Axiomtek reserves the right to change or revise this document and/or product at any time without notice.

  • Page 3: Safety Approvals

    Safety Approvals CE Marking  FCC Class A  FCC Compliance This equipment has been tested in compliance with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are meant to provide reasonable protection against harmful interference in a residential installation.

  • Page 4: Safety Precautions

    Safety Precautions Before getting started, please read the following important safety precautions. The DSB320-842 series does not come equipped with an operating system. An operating system must be loaded first before installing any software into the computer. Be sure to ground yourself to prevent static charge when installing the internal components.

  • Page 5: Scrap Computer Recycling

    For the computers that are no longer useful or no longer working well, please contact your Axiomtek distributor for recycling and we will make the proper arrangement. Trademarks Acknowledgments Axiomtek is a trademark of Axiomtek Co., Ltd. IBM, PC/AT, PS/2, VGA are trademarks of International Business Machines Corporation. ® Intel and Atom are registered trademarks of Intel Corporation.

  • Page 6: Table Of Contents

    Table of Contents Safety Approvals ...................... iii Safety Precautions ....................iv Scrap Computer Recycling ..................v CHAPTER 1 INTRODUCTION ................. 1 General Description ................1 System Specifications ................. 2 1.2.1 Main CPU Board ....................2 1.2.2 I/O System ......................2 1.2.3 System Specification ..................
  • Page 7 CHAPTER 3 JUMPER SETTINGS & CONNECTOR ......... 27 Connectors ..................27 Jumper Settings ................. 29 3.2.1 Audio Output Selection (JP2) ................ 30 3.2.2 Restore BIOS Optimal Defaults (JP4) ............30 3.2.3 Auto Power On (JP10) ..................30 3.2.4 COM1 Data/Power Selection (JP12) .............. 31 Connectors ..................
  • Page 8 Main Menu ................... 43 Advanced Menu .................. 44 Chipset Menu ..................55 Security Menu ..................58 Boot Menu ................... 59 Save & Exit Menu ................60 APPENDIX A WATCHDOG TIMER ..............63 About Watchdog Timer ..................63 How to Use Watchdog Timer ................63 APPENDIX B DIGITAL I/O ..................

  • Page 9: Chapter 1 Introduction

    DSB320-842User’s Manual CHAPTER 1 INTRODUCTION This chapter contains general information and detailed specifications of the DSB320-842 series. Chapter 1 includes the following sections:  General Description  Specification  Dimensions  Package List General Description The fanless DSB320-842 is an embedded system that supports Intel Celeron® 4-Cores J1900 processor on board processor to provide Windows®...

  • Page 10: System Specifications

    DSB320-842 User’s Manual System Specifications 1.2.1 Main CPU Board  ® Intel 4-Cores J1900 processor on board  System Chipset ® Intel Bay trail-D  BIOS AMI ® BIOS  System Memory One socket 204-pin DDR3L SODIMM 1333 system memory max up to 8GB Caution: please note the system memory supports DDR3L type (1.35V) ...

  • Page 11: System Specification

    DSB320-842User’s Manual 1.2.3 System Specification  Watchdog Timer Reset supported; 255 levels, 1~255 sec.  Power Supply External 12V@5A, 60W AC/DC power adapter  Operation Temperature 0℃ ~ 40℃ (32 ºF ~ 104ºF)  Storage Temperature -20℃ ~ 80℃ (-4 ºF ~ 176ºF) ...

  • Page 12: Mechanical Assembly

    DSB320-842 User’s Manual Mechanical Assembly 1.3.1 System Dimension This diagram shows you dimensions and outlines of the DSB320-842. Introduction...

  • Page 13: Wall Mount , Vesa Bracket And Tv Rack Bracket Dimension

    DSB320-842User’s Manual 1.3.2 Wall mount , VESA Bracket and TV Rack Bracket Dimension Wall mount Dimension Introduction...
  • Page 14 DSB320-842 User’s Manual VESA Mount Dimension Introduction...

  • Page 15: I/O Outlet

    DSB320-842User’s Manual 1.3.3 I/O outlet The following figures show you the locations of the DSB320-842 I/O outlets.  Front View drawing  Rear View drawing Connector Connector Power on/off button Digital I/O (DIO) 12Vdc in RS-232/422/485 (COM 1) Remote button switch USB 2.0 x2 Antenna(optional) HDMI output...

  • Page 16: Package List

    Power Adapter x 1 ;Power Cord x 1  Plastic Stand for stack up x 4  Wall-mount Brackets (optional)  TV –rack Bracket x 1 pair (2 pcs) (optional) If you cannot find the package or any items are missing, please contact Axiomtek distributors immediately. Introduction...

  • Page 17: Chapter 2 Hardware Installation

    DSB320-842User’s Manual CHAPTER 2 HARDWARE INSTALLATION The DSB320-842 is convenient for your various hardware configurations, such as storage, memory module, The chapter 2 will show you how to install the hardware. It includes:  Memory Module  Storage (mSATA)  Wireless Modules ...

  • Page 18: Installing The Dram

    DSB320-842 User’s Manual Installing the DRAM Step 1 Installing the DRAM: Turn off the system, and unplug the power cord. Step 2 Turn the system upside down to locate screws at the Bottom, loosen screws and remove the bottom cover Hardware Installation...
  • Page 19 DSB320-842User’s Manual Step 3 Place the memory module into the socket and press it firmly. The socket latches are levered upwards and clipped on to the edges of the DIMM. Push the module down, until it is firmly seated by locking two latches on the sides. Step 4 Hardware Installation...

  • Page 20: Installing Msata

    DSB320-842 User’s Manual Installing mSATA Step1 Installing the mSATA : Place the mSATA module into the socket and press it firmly down until it is fully located. Step 2 Push the module down, until it is firmly seated by locking two latches on the sides, and then fix the mSATA with screws with image illustrated Hardware Installation...
  • Page 21 DSB320-842User’s Manual Close the cover to the chassis, and fasten all screws. Step3 Hardware Installation...

  • Page 22: Installing The Wireless Modules

    DSB320-842 User’s Manual Installing the Wireless Modules The DSB320-842 series provides two Mini card slot for user to install one wireless LAN card. When installing the wireless LAN card, refer to the following instructions and illustration Step 1 Turn off the system, and unplug the power cord. And then turn the system up side down to locate screws at the Bottom, loosen screws.
  • Page 23 DSB320-842User’s Manual Step 3 Press it firmly down until it is fully located and then fasten the screw per illustrated. Step 4 Find the Antenna cable and connect it with wireless LAN card. Screw the antenna connector at expansion I/O side and Install the antenna on the wireless LAN card Hardware Installation...
  • Page 24 DSB320-842 User’s Manual Step 5 Assembly the back cover back and fasten all screws. Hardware Installation...

  • Page 25: Installing The 3G Modules

    DSB320-842User’s Manual Installing the 3G Modules The DSB320-842 series provides one Mini card slot for user to install one 3G module. When installing the 3G module, refer to the following instructions and illustration Step 1 Turn off the system, and unplug the power cord.
  • Page 26 DSB320-842 User’s Manual Step 4 Install 3G module. Place the 3G module into the socket and press it firmly down, then affix the screws per illustrated. Step 5 Fasten and fix the 3G module with screw per illustrated. Hardware Installation...
  • Page 27 DSB320-842User’s Manual Step 6 Find the Antenna cable and connect it with 3G module. Screw the antenna connector at expansion I/O side and Install the antenna on the 3G module Hardware Installation...

  • Page 28: Installing The Wall Mount (Optional)

    DSB320-842 User’s Manual Installing the Wall Mount (Optional) The DSB320-842 provides wall Mount that customers can install as below: Step 1 Prepare Wall Mount assembling components (screws and bracket) ready. Step 2 Fix the wall mount to the correct location, and fasten all screws. Hardware Installation...
  • Page 29 DSB320-842User’s Manual Step 3 Fix the wall mount to the correct location, and fasten all screws. Hardware Installation...

  • Page 30: Installing The Vesa Mount (Optional)

    DSB320-842 User’s Manual Installing the VESA Mount (optional) The DSB320-842 provides VESA Mount that customers can install as below: Step 1 Prepare VESA Mount assembling components (screws and VESA mount bracket) ready. Step 2 After loosing the screw of four footpads at the bottom of DSB320-842, and then put the DSB320-842 under VESA mount kit.
  • Page 31 DSB320-842User’s Manual Step 3 Fasten screws of VESA mount kit. Step 4 Decide correct mounting direction.DSB320-842 supports 75x75mm VESA mount. 75mm Hardware Installation...

  • Page 32: Installing The Tv Rack (Optional)

    DSB320-842 User’s Manual Installing the TV Rack (optional) The DSB320-842 provides VESA Mount that customers can install as below: Step 1 Prepare TV rack (2 pcs as 1 set) assembling components (screws and VESA mount bracket) ready. Step 2 Loose the screw of four footpads at the bottom of DSB320-842, and remove footpad.
  • Page 33 DSB320-842User’s Manual Step 3 Put the DSB320-842 under TV rack kit and fasten screws per illustrated. Step 4 Depends on the thickness of the display or TV set, adjust the bracket and fasten the screws (per illustrated) in order to fit and hang on the TV panel, per illustrated Hardware Installation...
  • Page 34 DSB320-842 User’s Manual This page is intentionally left blank. Hardware Installation...

  • Page 35: Chapter 3 Jumper Settings & Connector

    DSB320-842User’s Manual CHAPTER 3 JUMPER SETTINGS & CONNECTOR Proper jumper settings configure the DSB320-842 to meet your application purpose. We are herewith listing a summary table of all jumpers and default settings for onboard devices, respectively. Connectors Connectors connect this board with other parts of the system. Loose or improper connection might cause problems.
  • Page 36 DSB320-842 User’s Manual Button side Jumper Settings & Connector...

  • Page 37: Jumper Settings

    DSB320-842User’s Manual Jumper Settings Jumper is a small component consisting of jumper clip and jumper pins. Install jumper clip on 2 jumper pins to close. And remove jumper clip from 2 jumper pins to open. Below illustration shows how to set up jumper. Properly configure jumper settings on the CAPA841/842 to meet your application purpose.

  • Page 38: Audio Output Selection (Jp2)

    DSB320-842 User’s Manual 3.2.1 Audio Output Selection (JP2) Use this jumper to select line out or speaker out as source of audio output on audio connector. When speaker out is used, it delivers 1W/channel continuous at 8Ω loads .there is no speaker out function available.

  • Page 39: Com1 Data/Power Selection (Jp12)

    DSB320-842User’s Manual 3.2.4 COM1 Data/Power Selection (JP12) The COM1 port has +5V level power capability on DCD and +12V level on RI by setting this jumper. When this port is set to +5V or +12V level, please make sure its communication mode is RS-232.

  • Page 40: Connectors

    Connectors connect the board with other parts of the system. Loose or improper connection might cause problems. Make sure all connectors are properly and firmly connected. Here is a summary table shows you all connectors and button on the DSB320-842 Series. Connector Description 3.3.1...

  • Page 41: Dc Power Jack Connector

    DSB320-842User’s Manual 3.3.1 DC Power Jack Connector The system supports a DC12V only DC-in Jack connector for system power input. Connect it to the power AC-DC 60W Adapter Signal +12V 3.3.2 Audio Connector These two audio jacks ideal for Audio MIC-In and Audio Line-out. Signal Microphone In Line Out...

  • Page 42: Smbus Connector (Cn8)

    DSB320-842 User’s Manual 3.3.4 SMBus Connector (CN8) This connector is for SMBus interface. The SMBus (System Management Bus) is a simple 2- wire bus for the purpose of lightweight communication. Signal DATA 3.3.5 USB Port (USB2 & 3) The Universal Serial Bus (compliant with USB 2.0 (480Mbps)) connector on the rear I/O. It is commonly used for installing USB peripherals such as keyboard, mouse, scanner, etc.

  • Page 43: Hdmi Connector

    DSB320-842User’s Manual 3.3.6 HDMI Connector The HDMI (High-Definition Multimedia Interface) is a compact digital interface which is capable of transmitting high-definition video and high-resolution audio over a single cable. Its interface is available through connector CN10. Signal Signal HDMI OUT_DATA2+ HDMI OUT_DATA2- HDMI OUT_DATA1+ HDMI OUT_DATA1-...

  • Page 44: Usb Port (Usb0 & 1)

    DSB320-842 User’s Manual 3.3.8 USB Port (USB0 & 1) The Universal Serial Bus (compliant with USB 2.0 (480Mbps)) connector on the rear I/O. It is commonly used for installing USB peripherals such as keyboard, mouse, scanner, etc. Signal USB Port 0 Signal USB Port 1 USB VCC USB VCC...

  • Page 45: Com Port Connector (Com1)

    DSB320-842User’s Manual 3.3.10 COM Port Connector (COM1) This is a standard DB-9 connector. It is equipped with +5V level power capability on DCD and +12V level on RI by setting JP12 (see section 2.3.9). The pin assignments of RS-232/RS- 422/RS-485 are listed in table below. If you need COM1 port to support RS-422 or RS-485, please refer to BIOS setting in section 4.4.

  • Page 46: Half-Size Pci-Express Mini Card Slot (Scn1)

    DSB320-842 User’s Manual 3.3.12 Half-size PCI-Express Mini Card Slot (SCN1) The SCN1 is a half-size PCI-Express Mini Card connector. It supports the PCI-Express Mini Cards which are applied to either PCI-Express x1 or USB. It complies with PCI-Express Mini Card Spec. V1.2. Signal Signal WAKE#...

  • Page 47: Full-Size Pci-Express Mini Card Slot (Scn2)

    DSB320-842User’s Manual 3.3.13 Full-size PCI-Express Mini Card Slot (SCN2) This is a PCI-Express Mini Card connector on the bottom side applying to either PCI-Express or USB 2.0 or SATA (mSATA). It complies with PCI-Express Mini Card Spec. V1.2. It can also support mSATA cards.

  • Page 48: Sim Card Socket (Scn3)

    DSB320-842 User’s Manual 3.3.14 SIM Card Socket (SCN3) This board has SCN3 socket on the bottom side for inserting SIM Card. In order to work properly, the SIM Card must be used together with 3G module which is inserted to SCN1 or SCN2.

  • Page 49: Chapter 4 Ami Bios Setup Utility

    DSB320-842User’s Manual CHAPTER 4 AMI BIOS SETUP UTILITY The AMI UEFI BIOS provides users with a built-in setup program to modify basic system configuration. All configured parameters are stored in a flash chip to save the setup information whenever the power is turned off. This chapter provides users with detailed description about how to set up basic system configuration through the AMI BIOS setup utility.

  • Page 50: Navigation Keys

    DSB320-842 User’s Manual Navigation Keys The BIOS setup/utility uses a key-based navigation system called hot keys. Most of the BIOS setup utility hot keys can be used at any time during the setup navigation process. These keys include <F1>, <F2>, <Enter>, <ESC>, <Arrow> keys, and so on. Some of the navigation keys differ from one screen to another.

  • Page 51: Main Menu

    DSB320-842User’s Manual Main Menu When you first enter the setup utility, you will enter the Main setup screen. You can always return to the Main setup screen by selecting the Main tab. System Time/Date can be set up as described below. The Main BIOS setup screen is shown below. ...

  • Page 52: Advanced Menu

    DSB320-842 User’s Manual Advanced Menu The Advanced menu also allows users to set configuration of the CPU and other system devices. You can select any of the items in the left frame of the screen to go to the sub menus: ACPI Settings ►...
  • Page 53 DSB320-842User’s Manual  ACPI ACPI Sleep State When the sleep button is pressed, the system will be in the ACPI sleep state. The default is S3 (Suspend to RAM). AMI BIOS Setup Utility...
  • Page 54 DSB320-842 User’s Manual  WatchDog Timer Configuration Enable/Disabled WatchDog; the default setting is disabled AMI BIOS Setup Utility...
  • Page 55 DSB320-842User’s Manual  NCT6106D Super IO Configuration You can use this screen to select options for the Super IO Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen.
  • Page 56 DSB320-842 User’s Manual  Serial Port 1 (COM1) Configuration Serial Port Enable or disable serial port (COM) COM Port Type COM1 Supports RS-232/422/485 by your requirement, thus please follow your demand to select COM port setting under BIOS mode. AMI BIOS Setup Utility...
  • Page 57 DSB320-842User’s Manual  NCT6106D HW Monitor This screen monitors hardware status This screen displays the temperature of system and CPU, cooling fan speed in RPM and system voltages (VCORE, +3.3V, +12V and +5V). AMI BIOS Setup Utility...
  • Page 58 DSB320-842 User’s Manual  S5 RTC Wake Setting Enable or disable system wake on alarm event. When enabled, System will wake on the hr:min::sec specified; the default setting is disabled While enable RTC Wake up setting, there are two options for setting Fixed Time/Dynamic Time;...
  • Page 59 DSB320-842User’s Manual  CPU Configuration This screen shows the CPU Configuration. Socket 0 CPU Information This item is for socket specific CPU information. Intel Virtualization Technology Allow a hardware platform to run multiple operating systems separately and simultaneously, enabling one system to virtually function as several systems. EIST Enable /Disable Intel SpeedStep AMI BIOS Setup Utility...
  • Page 60 DSB320-842 User’s Manual  IDE Configuration In the IDE Configuration menu, you can see the currently installed hardware in the SATA ports. During system boot up, the BIOS automatically detects the presence of SATA devices. Serial-ATA (SATA) Enable or disable the SATA Controller feature. The default is Enabled. SATA Mode Selection Determine how SATA controller(s) operate.
  • Page 61 DSB320-842User’s Manual  LAN Controller Enable or disable integrated LAN to wake the system; default setting is enabled AMI BIOS Setup Utility...
  • Page 62 DSB320-842 User’s Manual  USB Configuration Enable Legacy USB support. Auto option disables legacy support if no USB devices are connected. DISABLE option will keep USB devices available only for EFI applications USB Devices Display all detected USB devices. Legacy USB Support Use this item to enable or disable support for USB device on legacy operating system.

  • Page 63: Chipset Menu

    DSB320-842User’s Manual Chipset Menu The Chipset menu allows users to change the advanced chipset settings. You can select any of the items in the left frame of the screen to go to the sub menus: North Bridge ► South Bridge ►...
  • Page 64 DSB320-842 User’s Manual  North Bridge AMI BIOS Setup Utility...
  • Page 65 DSB320-842User’s Manual  South Bridge This screen allows users to configure parameters of South Bridge chipset. Audio Controller Control detection of the Azalia device. Disabled - Azalia will be unconditionally disabled. Enabled - Azalia will be unconditionally enabled. AMI BIOS Setup Utility...

  • Page 66: Security Menu

    DSB320-842 User’s Manual Security Menu The Security menu allows users to change the security settings for the system. Administrator Password This item indicates whether an administrator password has been set (installed or uninstalled). User Password This item indicates whether an user password has been set (installed or uninstalled). AMI BIOS Setup Utility...

  • Page 67: Boot Menu

    DSB320-842User’s Manual Boot Menu The Boot menu allows users to change boot options of the system. Setup Prompt Timeout Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting. Bootup NumLock State Use this item to select the power-on state for the keyboard NumLock. Quiet Boot Select to display either POST output messages or a splash screen during boot-up.

  • Page 68: Save & Exit Menu

    DSB320-842 User’s Manual Save & Exit Menu The Save & Exit menu allows users to load your system configuration with optimal or fail-safe default values. Save Changes and Exit When you have completed the system configuration changes, select this option to leave Setup and return to Main Menu.
  • Page 69 DSB320-842User’s Manual Save Changes When you have completed the system configuration changes, select this option to save changes. Select Save Changes from the Save & Exit menu and press <Enter>. Select Yes to save changes. Discard Changes Select this option to quit Setup without making any permanent changes to the system configuration.
  • Page 70 DSB320-842 User’s Manual This page is intentionally left blank. AMI BIOS Setup Utility...

  • Page 71: Appendix Awatchdog Timer

    DSB320-842User’s Manual APPENDIX A WATCHDOG TIMER About Watchdog Timer After the system stops working for a while, it can be auto-reset by the watchdog timer. The integrated watchdog timer can be set up in the system reset mode by program. How to Use Watchdog Timer The following example enables configuration using debug tool.
  • Page 72 DSB320-842 User’s Manual Disable WDT  Enable configuration: O 2E 87 ; Un-lock super I/O O 2E 87  Select logic device: O 2E 07 O 2F 08  WDT device disable: O 2E 30 O 2F 00 Watchdog Timer...

  • Page 73: Appendix Bdigital I/O

    DSB320-842User’s Manual APPENDIX B DIGITAL I/O About Digital I/O The onboard digital I/O has 8 bits (DIO0~7). Each bit can be set to function as input or output by software programming. In default, all pins are pulled high with +5V level (according to main power).

  • Page 74: Digital I/O Programming

    DSB320-842 User’s Manual Digital I/O Programming The following example enables configuration using debug tool. Start digital I/O programming  Enable configuration: O 2E 87 ; Un-lock super I/O O 2E 87  Select logic device: O 2E 07 O 2F 07 ...
  • Page 75 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Axiomtek DSB320-842...

Table of Contents