Dlm - dlm ge sws or tlc relay to lmcp retrofit kits (4 pages)
Summary of Contents for LEGRAND 4 121 70
Page 1
Connected Latching Relay 4 121 70 - 1 991 21 Requires the installation of a: Gateway module Connected Starter Pack "... with Netatmo" Any kind of “with Netatmo” gateway Composition Control wiring authorized EN 60669-2-1 Self-protected Line OUT ON/OFF Load...
Page 2
C1, C2: Preparation, connection 2x 1.5mm² 2.5mm² N, L, Load: 2x 2.5mm² Turn off the power 6mm² at general C1,C2, circuit breaker N, L, Load: MIN : 0.8Nm 4 mm MAX : 1.4Nm Wiring examples Do not use a switch (with dimmer option) connected to control a Connected Latching Relay.
Page 3
**: After wiring the installation, refit the front plate so that no active live part is accessible. Finalize the installation in the Legrand Home + Control app Download the Home + Control App and follow the instructions for adding the connected product in your setup.
Page 4
(> 5 seconds) until the configuration indicator lights up in fixed red. It is no longer associated with the gateway present in the installation. >5s www.legrand.fr/reference/412170 LEGRAND - Pro and Consumer Service - BP 30076 87002 LIMOGES CEDEX FRANCE • www.legrand.com SIMPLIFIED DECLARATION OF CONFORMITY The undersigned, Legrand declares that the radio equipment listed on this instruction sheet are compliant to the directive 2014/53/UE.
Need help?
Do you have a question about the 4 121 70 and is the answer not in the manual?
Questions and answers