Riello RS 45/E BLU Installation, Use And Maintenance Instructions page 34

Parameter
No.
Description
par.
Selection of the burner operation during the interruption of the switch-over
with the system of remote management.
0 = burner switched off
With modulating operation the settings of the values are the following:
0...19.9 = burner switched off
148 20...100 = 20...100% burner modulation field (20% = low flame)
These settings adapt to parameters 545 (modulation minimum) and 546
(modulation maximum)
With stage operation: 0 = burner switched off, 1st, 2nd, 3rd stage according
to the values assigned to P1, P2, P3
No setting = no function in the event of communication interruption
161 Total number of errors
162 Hours of operation (that can be reset)
163 Total hours of power supply to control box
164 Total number of start-ups (that can be reset)
166 Total number of start-ups
Volumetric delivery of fuel in the selected unit of measurement
167
(that can be reset)
200 Checks on the burner
Burner operation mode (fuel supply line, modulating/stage, servomotors,
etc.)
-- = not defined (eliminate curves)
1 = Gmod
2 = Gp1 mod
3 = Gp2 mod
201
4 = Lo mod
5 = Lo 2 stages
6 = Lo 3 stages
7 = Gmod pneu
8 = Gp1 mod pneu
9 = Gp2 mod pneu
Stopping of the program
0 = deactivated
1 = pre-purging (Ph24)
208
2 = Ignition (Ph36)
3 = Interval 1 (Ph44)
4 = Interval 2 (Ph52)
210 Alarm/lockout at start
211 Uphill train fan motor
212 Maximum time to reach low flame
215 Maximum repeats of safety circuit
Unit of
Number of Modifica-
measure-
elements tion
ment
Modifica-
1 tion /
zero setting
Reading
1 -
only
1 h Reset
Reading
1 h
only
1 - Reset
Reading
1 -
only
1 - Reset
Modifica-
1 - tion /
zero setting
1 - Modification
1 - Modification
1 s Modification
1 s Modification
1 - Modification
Values interval
Degree of pre-
cision
Min. Max.
0% 100% 0.1%
0 65535 1
0 h 999999h 1h
0 h 999999h 1h
0 999999 1
0 999999 1
0 99999999 1
1 9 1
0 4 1
0 1 1
2s 60 s 0.2 s
0.2 s 10 min 0.2 s
1 16 1
Predefined
Access mode
setting
Not defined Parameters mode
0 Service mode
0 h Info mode
0 h Info mode
0 Info mode
0 Info mode
0 Info mode
Not defined Parameters mode
0 Parameters mode
0 Parameters mode
2 s Parameters mode
45 s Parameters mode
16 Parameters mode