Yamaha XMAX Owner's Manual page 24

Instrument and control functions
The electrical circuit of the indicator
can be checked according to the fol-
lowing procedure.
1. Turn the key to "ON".
2. Check that the V-belt replacement
indicator comes on for a few sec-
onds and then goes off.
3. If the V-belt replacement indicator
does not come on, have a Yamaha
dealer check the electrical circuit.
3
Multi-function display
1
2
3
4
5 6
ZAUM1107
1. Ambient temperature
2. Average speed
3. Instantaneous fuel consumption
4. Average fuel consumption
5. Icy road warning indicator "
6. Battery voltage
7. "TRIP/INFO" switch
The multi-function display is equipped
with the following:
 an ambient temperature display
 a battery voltage level display
 a fuel consumption display (aver-
age and instantaneous)
 an average speed display
 a warning message function
Push the "INFO" button to switch the
display between the ambient tempera-
ture "Air", the battery voltage
average
"Ave/Cons__._km/L"
TRIP
7
INFO
"
fuel consumption
or "Ave/Cons
__._ L/100 km", the instantaneous fuel
consumption
"Cons__._L/100 km", and the average
speed "Ave" in the following order:
Air →
L/100 km → Cons__._km/L or L/100
km → Ave → Air
For the UK:
If the display units have been set to
miles, pushing the "INFO" button will
switch the display in the following or-
der:
Air →
Cons__._MPG → Ave → Air
Ambient temperature display
ZAUM1108
This display shows the ambient tem-
perature from –10 °C to 50 °C in 1 °C
increments. The temperature dis-
played may vary from the actual ambi-
ent temperature.
TIP
The icy road warning indicator " " will
flash when the temperature is below
4°C.
, the
3-10
"Cons__._km/L"
→ Ave/Cons_ _._ km/L or
→ Ave/Cons_ _._ MPG →
or